Description
The Alcudia is a slim LED bathroom wall light in black, built around a square centre body of aluminium and steel with a satin plastic diffuser at each end. It is 42cm long and 3cm high across the bar, and it stands 6cm out from the wall, so it keeps a low profile where space is tight. The LEDs are integrated: two lights of 5.5W each, giving 600lm apiece at 3000K, a warm white. Its IP44 rating means it is protected from splashing water, which settles the question for a bathroom wall.
Fitted upright, one diffuser sits above the black centre and one below, and both glow together whenever the light is lit. We like it beside a bathroom mirror, where it gives a warm light for shaving and make-up; a qualified electrician should install it and will confirm the right zone. The clean, square lines suit a hallway, a landing or a bedroom just as well, where the black finish draws a crisp outline against a pale wall. It suits anyone who wants a modern, compact wall light that leaves a small room feeling uncluttered.
The body pairs aluminium with steel, and the black colour runs through both the centre block and the wall mount. The diffusers are plastic with a satin finish, so the LEDs read as a soft glow rather than bright points. There is no switch on the light itself: it is switched at the wall and is not dimmable, so pair it with an ordinary wall switch rather than a dimmer. Because the LEDs are integrated, there is no separate bulb to fit. It carries energy class F, weighs 0.777KG packed, and the installation instructions are available as a download.
Specification
| Length |
42cm |
| Height |
3cm |
| Projection |
6cm |
| Body Material |
Aluminium, steel |
| Body Colour |
Black |
| Shade Material |
Plastic |
| Shade Colour |
Satin finish |
| Light Source |
LED, integrated |
| Wattage |
2 x 5.5W |
| Lumens |
600lm per light (2 lights) |
| Colour Temperature |
3000K |
| Dimmable |
No |
| Switch |
None (switched at the wall) |
| IP Rating |
IP44 |
| Protection Class |
Class II |
| Voltage |
220-240V, 50/60Hz |
| Energy Class |
F |
| Weight (packed) |
0.777KG |
Downloads
Installation Instructions (PDF)
Frequently Asked
Can the Alcudia go in a bathroom?
Yes. It is rated IP44, so it is protected from splashing water, and a qualified electrician will confirm the right zone for your bathroom.
How bright is the light?
There are two integrated LED lights of 5.5W each, and each one gives 600lm at 3000K, a warm white.
Is the light dimmable?
No, it is not dimmable. It has no switch of its own and is switched at the wall instead.
How big is the wall light?
It is 42cm long and 3cm high across the bar, and it projects 6cm from the wall.
What materials are the body and diffusers?
The black body is aluminium and steel, and the two diffusers are plastic with a satin finish for a soft glow.
Does it need a bulb?
No separate bulb is needed, because the LEDs are integrated and come built into the fitting.