Alai 6-8 Seater Extendable Glass Dining Table - Black Metal Base, White Veined Glass

The Alai is an extendable dining table with a 10mm tempered glass top printed with a white veined pattern, supported by a black sandblasted metal base with angular A-frame legs. The table measures 160cm x 90cm when closed and extends to 240cm with two concealed 40cm side leaves that pull out from beneath the main top, converting the table from a 6-seater to an 8-seater configuration.

Designed for dining rooms and open-plan kitchen-diners where space requirements vary between everyday use and entertaining, the Alai suits contemporary and modern interiors. The extension mechanism uses metal runners concealed beneath the main glass surface, allowing the leaves to be deployed without needing to lift or remove the central section. The 76cm table height is standard for dining chairs with 45-48cm seat heights, and the 90cm depth provides comfortable elbow room for place settings on both sides.

The black sandblasted finish on the metal base creates a low-sheen matte surface that hides fingerprints and minor scuffs better than polished or painted finishes. The white veined pattern on the glass mimics natural marble veining without the porosity or maintenance requirements of actual stone. At 91.82kg the table has substantial mass, reducing wobble under load and providing stability when the extensions are deployed. The angular geometry of the A-frame legs gives clearance for chairs to tuck fully under the table edge.

Product Specification Sheet

How does the extension mechanism work?

Two 40cm glass leaves are stored beneath the main top on metal runners. To extend the table, pull the leaves out from either side until they lock into position, extending the total length from 160cm to 240cm. The main top does not need to be lifted or removed during extension.

Is the glass top heat-resistant?

The 10mm tempered glass top has higher heat resistance than standard glass, but it is good practice to use trivets or placemats under hot serving dishes to avoid thermal shock. The printed veined pattern is fused to the underside of the glass, so it cannot be scratched or worn by tableware.

What chairs suit a 76cm table height?

Standard dining chairs with seat heights between 45cm and 48cm pair comfortably with this 76cm table height, providing 28-31cm of knee clearance. The A-frame leg geometry allows chairs to tuck fully under the table edge when not in use.

How is the glass cleaned?

Wipe the glass top with a damp microfibre cloth and standard glass cleaner. The veined print is on the underside of the glass, protected from direct contact with tableware and spills. The black sandblasted metal base can be wiped with a barely-damp cloth to remove dust.