XLEDEX 3.8W Filament Candle LED Bulb E14 60W-eq 320° 806lm - Warm White

The XLEDEX is a C35 candle LED bulb with a small Edison screw (E14, SES) cap and a flame-shaped clear-glass body holding visible LED filaments for a vintage look. It draws 3.8 W and gives 806 lumens at 2700K warm white, so the actual power used stays low while the light output stands in for an old 60 W bulb. A wide 320 degree beam spreads light around the bulb rather than throwing it in one direction, suiting open and shaded fittings alike. In US terms this is a candelabra-style filament bulb, though the screw thread is the European E14 SES rather than the American E12.

The candle shape and exposed filaments make this a good fit for chandeliers, wall brackets, pendant clusters and lantern-style fittings in living rooms, dining rooms and hallways, where the bulb is on show and the glow matters as much as the brightness. The 2700K tone is a soft, relaxed warm white that works well in evening and bedroom settings. Because the light radiates almost all the way around at 320 degrees, it lights a room evenly from a single point rather than as a tight spot. This is a dry indoor bulb (IP20), so keep it to interior fittings and clear of bathrooms, damp areas and anywhere open to the weather.

The bulb measures just Ø35 by 97 mm and weighs 14 g, slim enough for narrow candle holders and decorative shades. It runs on 220 to 240 V AC mains direct from the E14 fitting with no transformer needed, and renders colour at Ra 80. Efficiency is high at 212 lm/W, with a rated lifespan of 50,000 hours that cuts how often you change a bulb in hard-to-reach fittings. Note this version is non-dimmable, so pair it with a standard on/off switch. The transparent finish keeps the filament detail on view.

Product Specification Sheet

Range Datasheet

Which fitting does this bulb need?

It has an E14 cap, also called Small Edison Screw or SES. This is the smaller screw thread used by many candle, chandelier and wall-light fittings. Check your existing bulb or fitting takes E14 before ordering.

What old bulb wattage does it replace?

It replaces a 60 W traditional incandescent or halogen candle bulb while drawing only 3.8 W itself. The 806 lumen output matches that older bulb, so you get the same brightness for a fraction of the energy.

Is this bulb dimmable?

No, this version is non-dimmable and should be used with a standard on/off switch. Fitting it on a dimmer circuit can cause flicker or buzzing and may shorten its life.

What does the warm white 2700K tone look like?

2700K is a soft, cosy warm white, close to the colour of a traditional filament bulb. Combined with the visible filaments and clear glass, it gives a relaxed glow well suited to living rooms, dining areas and bedrooms.