Free Delivery on all orders over £99*

XLED E14 6W Filament Candle Bulb 60W-eq 806lm 320° - Warm White

£299
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The XLED is a candle LED bulb in the classic C35 flame shape, fitting an E14 Small Edison Screw (SES) cap, known in the US as a candelabra base. It draws just 6 W yet produces 806 lumens of 2700K warm white light, replacing an old 60 W incandescent candle bulb while using a fraction of the power. The visible LED filaments sit inside clear glass for a vintage look, and a wide 320° beam angle spreads light around the bulb much like the traditional lamp it stands in for.

Suited to chandeliers, wall brackets, candle-style pendants and table lamps, this bulb places warm, all-round light into living rooms, dining areas, hallways and bedrooms. The 320° spread fills a fitting evenly rather than throwing a directional beam, so it works well in multi-arm chandeliers and open shades where the bulb is on show. With a colour rendering of Ra 80 the 2700K tone keeps a soft, homely warmth. As an IP20 bulb it is for dry indoor use only, so keep it clear of bathrooms, porches and any outdoor or damp setting.

Built around a transparent glass envelope at Ø35 by 97 mm and weighing only 14 g, the XLED runs on 220 to 240 V AC mains direct from the lampholder, with an efficiency of 134 lm/W. It is a non-dimmable bulb, so pair it with a standard on/off switch rather than a dimmer. The rated lifespan is 15,000 hours. This bulb is also offered in matching E14 caps across the wider XLED range for a consistent warm filament look throughout a room.

Specification
Cap / fitting E14 Small Edison Screw (SES)
Bulb shape Candle (filament)
Power 6 W
Replaces 60 W incandescent
Luminous flux 806 lm
Efficiency 134 lm/W
Colour temperature 2700K (Warm White)
Colour rendering (CRI) Ra 80
Dimmable No
Rated life 15000 hours
Downloads

Product Specification Sheet

Range Datasheet

Frequently Asked

Which fitting do I need for this bulb?

It uses an E14 Small Edison Screw (SES) cap, the smaller screw fitting common on chandeliers, wall lights and candle-style lamps. In the US this is the candelabra base. Check your existing bulb or lampholder is E14 before ordering.

What old bulb wattage does it replace?

The XLED draws only 6 W but gives 806 lumens, comparable to a 60 W incandescent candle bulb. You get the same brightness for roughly a tenth of the energy. The bulb itself never draws the equivalent 60 W.

Is this bulb dimmable?

No, it is a non-dimmable bulb. Use it on a standard on/off switch rather than a dimmer circuit, as fitting it to a dimmer may cause flicker or shorten its life.

What does the filament design look like?

It has visible LED filaments inside clear transparent glass, giving the warm vintage look of an old filament lamp. With a 2700K warm white tone and Ra 80 colour rendering, it suits open shades and chandeliers where the bulb is on display.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Takes standard bulbs

Takes standard E14 bulbs, so you choose the brightness and colour to suit the room.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The XLED is a candle LED bulb in the classic C35 flame shape, fitting an E14 Small Edison Screw (SES) cap, known in the US as a candelabra base. It draws just 6 W yet produces 806 lumens of 2700K warm white light, replacing an old 60 W incandescent candle bulb while using a fraction of the power. The visible LED filaments sit inside clear glass for a vintage look, and a wide 320° beam angle spreads light around the bulb much like the traditional lamp it stands in for.

    Suited to chandeliers, wall brackets, candle-style pendants and table lamps, this bulb places warm, all-round light into living rooms, dining areas, hallways and bedrooms. The 320° spread fills a fitting evenly rather than throwing a directional beam, so it works well in multi-arm chandeliers and open shades where the bulb is on show. With a colour rendering of Ra 80 the 2700K tone keeps a soft, homely warmth. As an IP20 bulb it is for dry indoor use only, so keep it clear of bathrooms, porches and any outdoor or damp setting.

    Built around a transparent glass envelope at Ø35 by 97 mm and weighing only 14 g, the XLED runs on 220 to 240 V AC mains direct from the lampholder, with an efficiency of 134 lm/W. It is a non-dimmable bulb, so pair it with a standard on/off switch rather than a dimmer. The rated lifespan is 15,000 hours. This bulb is also offered in matching E14 caps across the wider XLED range for a consistent warm filament look throughout a room.

    Specification
    Cap / fitting E14 Small Edison Screw (SES)
    Bulb shape Candle (filament)
    Power 6 W
    Replaces 60 W incandescent
    Luminous flux 806 lm
    Efficiency 134 lm/W
    Colour temperature 2700K (Warm White)
    Colour rendering (CRI) Ra 80
    Dimmable No
    Rated life 15000 hours
    Downloads

    Product Specification Sheet

    Range Datasheet

    Frequently Asked

    Which fitting do I need for this bulb?

    It uses an E14 Small Edison Screw (SES) cap, the smaller screw fitting common on chandeliers, wall lights and candle-style lamps. In the US this is the candelabra base. Check your existing bulb or lampholder is E14 before ordering.

    What old bulb wattage does it replace?

    The XLED draws only 6 W but gives 806 lumens, comparable to a 60 W incandescent candle bulb. You get the same brightness for roughly a tenth of the energy. The bulb itself never draws the equivalent 60 W.

    Is this bulb dimmable?

    No, it is a non-dimmable bulb. Use it on a standard on/off switch rather than a dimmer circuit, as fitting it to a dimmer may cause flicker or shorten its life.

    What does the filament design look like?

    It has visible LED filaments inside clear transparent glass, giving the warm vintage look of an old filament lamp. With a 2700K warm white tone and Ra 80 colour rendering, it suits open shades and chandeliers where the bulb is on display.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.