XLED E14 6W Filament Candle Bulb 60W-eq 806lm 320° - Cool White

The XLED candle is a 6 W LED bulb in the classic C35 flame shape, drawing just 6 W while replacing a traditional 60 W incandescent of the same fitting. It fits the E14 Small Edison Screw (SES) cap, which US buyers will know as the candelabra size, and gives out 806 lumens at 4000K cool white for a crisp, neutral light. Visible LED filaments sit behind clear glass for a vintage, exposed-element look, and the wide 320 degree beam angle throws light almost all the way around the bulb rather than in one direction.

This shape is at home in chandeliers, wall brackets, pendants and candelabra fittings across living rooms, dining rooms and hallways, where the slim candle profile and bare glass are meant to be seen. The 320 degree spread and 806 lumen output suit decorative multi-lamp fittings, where several bulbs together build the overall light level, rather than a single ambient ceiling fitting. The Ra 80 colour rendering keeps everyday colours looking natural, and the cool white tone reads cleaner and more contemporary than a warm candle bulb. Being a dry indoor IP20 bulb, keep it to interior fittings and clear of bathrooms, porches and any damp or outdoor positions.

The bulb measures just 35 mm across and 97 mm long and weighs only 14 g, so it sits neatly in narrow candelabra holders. It runs on 220 to 240 V AC mains through the E14 cap with no separate transformer needed, and rates an efficiency of 134 lm/W for a 15,000 hour life. The clear transparent glass shows off the filament array, and this is a non-dimmable bulb, so pair it with a standard on/off switch rather than a dimmer. The XLED candle range also includes warm white tones and other cap options to match across a fitting.

Product Specification Sheet

Range Datasheet

What fitting does this bulb need?

It has an E14 cap, the Small Edison Screw (SES) size, which simply screws into any E14 holder. US buyers will recognise this as the candelabra size, though the standard there is often E12, so check your fitting matches E14.

What old bulb wattage does it replace?

The LED draws only 6 W itself but gives 806 lumens, so it replaces a traditional 60 W incandescent candle bulb. You get the same brightness for a fraction of the running cost and a rated 15,000 hour life.

Is this a warm or cool light?

It is 4000K cool white, a crisp neutral tone that reads cleaner and more contemporary than a yellow warm-white candle bulb. With Ra 80 colour rendering, everyday colours still look natural under it.

Can I dim this bulb?

No, this is a non-dimmable bulb, so use it with a standard on/off switch. Fitting it to a dimmer circuit can cause flicker or buzzing, so choose a dimmable model if you need to adjust the level.