XLED E14 5.9W Candle Filament 60W-eq 806lm 320° LED Bulb - Warm White

The XLED is a candle LED bulb in the classic C35 flame shape, fitting the E14 Small Edison Screw (SES) cap. It draws just 5.9W while putting out 806 lumens, the kind of brightness you would once have needed a 60W old bulb for. Across the Atlantic this is the candelabra format, though the cap here is the E14 rather than the US E12, so check the holder before ordering. The light is a 2700K warm white with a wide 320° beam angle, so it spreads almost the full way around the bulb rather than throwing in one direction.

Being a candle shape, the XLED suits the fittings that show the bulb off: chandeliers, wall brackets, pendant clusters and table lamps in living rooms, dining rooms and hallways. The 320° spread and warm 2700K tone give an even, cosy glow rather than a focused pool, which is why it works well in multi-arm fittings where several bulbs share the task of lighting a room. The Ra 80 colour rendering keeps skin tones and furnishings looking natural. With an IP20 rating it is for dry indoor use only, so keep it away from bathrooms, porches and anywhere exposed to damp.

The clear transparent glass reveals the visible LED filaments inside, giving the vintage look that pairs with exposed-fitting and period-style fixtures. At Ø35 × 123 mm and only 13g it slots into standard candle holders, and the 137 lm/W efficiency keeps running costs low across its rated 25,000-hour lifespan. This bulb is non-dimmable, so pair it with a standard on/off circuit rather than a dimmer switch. The XLED is also offered in other caps and shapes across the range if you need to match it elsewhere in the home.

Product Specification Sheet

Range Datasheet

Which fitting does this bulb need?

It uses an E14 Small Edison Screw (SES) cap, the smaller of the two common screw fittings. Check that your holder is E14 rather than the larger E27, or a bayonet type, before ordering.

What old bulb wattage does it replace?

The XLED draws only 5.9W itself but gives 806 lumens, which matches the output of a 60W traditional incandescent candle bulb. You get the same brightness for a fraction of the running cost.

Is this bulb dimmable?

No, this is a non-dimmable bulb, so it should be used on a standard on/off switch. Fitting it to a dimmer circuit may cause flickering or buzzing and is not recommended.

What does the filament design look like when lit?

It has visible LED filaments behind clear transparent glass, giving the warm vintage look of an old-fashioned bulb. At 2700K warm white with Ra 80 colour rendering, it suits exposed and period-style fittings where the bulb itself is on show.