XLED 7W Filament Candle LED Bulb E14 75W-eq 1055lm 320° - Cool White

The XLED is a candle-shape (C35) filament LED bulb that fits an E14 Small Edison Screw (SES) cap, the standard small-screw fitting found across the UK and described as a candelabra base in US terms. It draws 7 W of actual power while putting out 1055 lumens, so it replaces a 75 W old-style bulb on brightness alone at a fraction of the running cost. The tone is 4000K cool white, a clean, neutral light, and the 320 degree beam angle spreads it almost all the way around the bulb rather than in a single direction.

Behind the clear glass sit visible LED filaments that give the vintage, exposed-filament look, which suits open or shaded fittings where the bulb is on show. It is well matched to chandeliers, wall brackets, pendants and candelabra-style fixtures in living rooms, dining rooms and hallways, and several can share a multi-arm fitting to lift overall light levels. Because the rating is IP20, it is for dry indoor use only and should be kept out of bathrooms, porches and any damp or outdoor position. The cool white tone reads brighter and crisper than warm white, making it a practical choice where you want clear, functional light.

The bulb measures just 35 mm across and 97 mm long and weighs only 14 g, so it slots neatly into compact candle fittings. It runs on 220 to 240 V AC mains, reaches an efficiency of 151 lm/W and is rated for 15,000 hours of use. Colour rendering is Ra 80 and the transparent glass keeps the filament look on display. This bulb is non-dimmable, so pair it with a standard on/off switch rather than a dimmer.

Product Specification Sheet

Range Datasheet

Which fitting does this bulb need?

It uses an E14 Small Edison Screw (SES) cap, the smaller of the two common screw fittings. In US terms this is a candelabra-style base. Check that your fixture takes E14 rather than the larger E27 before ordering.

What old bulb wattage does it replace?

The XLED draws just 7 W but produces 1055 lumens, which matches the brightness of a 75 W traditional bulb. You get the same light output for a small fraction of the energy use.

Is this bulb dimmable?

No, this is a non-dimmable bulb, so it should be used with a standard on/off switch. Fitting it to a dimmer circuit can cause flicker or buzzing and is not recommended.

What does warm white look like compared with this cool white?

This bulb is 4000K cool white, a clean and neutral tone that reads crisper and brighter than warm white. It suits hallways, dining areas and living spaces where you want clear, functional light rather than a soft yellow glow.