Description
The PRO-S is a 95W LED street light built for pole and column mounting along roads, car parks and service yards. It delivers 14750 lumens at 155 lm/W, with a neutral 4000K output that keeps surfaces and signage clearly readable after dark. The wide X150/Y125° asymmetric beam throws light forward and along the carriageway rather than straight down, which is what US specifiers look for in a parking lot light or shoebox area light. At 605 by 265 by 108 mm and 4.17 kg, it sits on a standard pole-top or column spigot to give an even wash across the surface below.
Mounted on a pole, column or post, the PRO-S suits roadways, residential streets, car parks, loading bays and commercial access routes. Because it is column-mounted and aimed across the ground, fixtures are spaced along a run so the asymmetric beams overlap and avoid dark gaps between poles. The throw is geared toward lateral coverage of a traffic lane or parking aisle rather than a tight pool of light, so mounting height and pole spacing should follow the site layout. It is well suited to replacing older SON or metal-halide street lanterns of similar output, with far lower running cost from the 155 lm/W efficiency.
The body is aluminium alloy in a grey finish, carrying an IP66 rating for fully exposed outdoor and wet locations and an IK08 rating against impact. With a 100,000 hour rated lifespan and integrated LEDs, it is designed to run for years with minimal attention on hard-to-reach columns. The fitting runs on 220-240V AC and is non-dimmable, giving a fixed 95W output. This is part of the wider PRO-S range, which offers further wattages for matching different road and car park layouts.
Specification
| Power |
95W |
| Voltage |
220-240 AC |
| Luminous flux |
14750 lm |
| Efficiency |
155 lm/W |
| Colour temperature |
4000K |
| Colour rendering (CRI) |
Ra 70 |
| Beam angle |
150° × 125° |
| IP rating |
IP66 |
| IK rating |
IK08 |
| Dimmable |
No |
| Mounting |
Street Pole |
| Lifespan |
100,000 hours |
| Dimensions |
605 × 265 × 108 mm |
| Weight |
4.17 kg |
| Material |
Aluminium Alloy |
| Finish |
Grey |
Downloads
Product Specification Sheet
Range Datasheet
Frequently Asked
How is this street light mounted?
It is designed for pole, column or post-top mounting and fits onto a standard street pole spigot. It is not a wall fitting and should not be fixed to a building. Mount it at a height suited to the road or car park it serves.
Can it be used in fully exposed outdoor locations?
Yes. The PRO-S carries an IP66 rating, so it is weatherproof and suitable for fully exposed outdoor and wet locations, including direct rain. The aluminium alloy housing also has an IK08 impact rating for durability on public sites.
How far apart should the fittings be spaced?
The X150/Y125° asymmetric beam casts light forward and along the road or aisle rather than straight down, so units are spaced along a run with the beams overlapping. Exact spacing depends on pole height and the layout of the street or car park. This keeps coverage even and avoids dark gaps between poles.
What does this replace and how bright is it?
It produces 14750 lumens from 95W at 155 lm/W, with a neutral 4000K colour. At that output it is a practical LED replacement for older SON or metal-halide street and car park lanterns of similar brightness, while drawing far less power.