PRO-S 600x260 80W LED Street Light IP66 - Grey

The PRO-S is an 80W pole-mounted LED street light built for roads, access lanes and car park areas. It puts out 12,830 lumens at a neutral 4000K white, with an efficiency of 160 lm/W that keeps running costs in check across long nightly hours. The wide X150/Y125 degree asymmetric beam (rendered as 150 degrees by 125 degrees) spreads light forward and across the carriageway rather than straight down, which is what an area light or parking lot light needs to do. In US terms this style sits with the shoebox area lights used along streets and over open parking lots.

Mounted on a column or street pole, the PRO-S suits public roads, residential access routes, retail and commercial car parks, depots and yards. The asymmetric throw lets each unit cover a length of carriageway or a run of parking bays, so columns can be spaced along a road or around a car park perimeter for even illumination between poles. Because this is exterior area lighting rather than ambient room lighting, coverage is best judged by pole spacing and mounting height for the road or car park width being lit, not by a floor area figure. At 4.17 kg it is a manageable load for a standard pole-top spigot, and the wide beam helps reduce dark gaps between fittings.

The body is aluminium alloy in a grey finish, rated IP66 for full weatherproof performance in exposed, wet and dust-laden outdoor locations, with an IK08 impact rating for durability. It runs direct from 220 to 240V AC mains and is a non-dimmable, fixed-output fitting with a rated lifespan of 100,000 hours. Mounting is to a street pole or column via the spigot, never to a wall or building. The PRO-S range includes further wattages for matching road and car park schemes.

Product Specification Sheet

Range Datasheet

How is the PRO-S street light mounted?

It mounts on a street pole or column via a spigot fixing at the top of the pole. It is designed as a pole-top or post-top luminaire for roads and car parks, and is not a wall-mounted fitting.

Is it suitable for fully exposed outdoor and wet conditions?

Yes. The PRO-S carries an IP66 rating, so it is fully weatherproof against driving rain, wet conditions and dust ingress. The IK08 rating adds impact resistance for exposed roadside and car park settings.

How should the poles be spaced along a road or car park?

The wide X150/Y125 degree asymmetric beam spreads light forward and across the surface, so each pole covers a length of carriageway or a run of bays. Spacing depends on pole height and the road or car park width, with columns set to keep light even between fittings and avoid dark gaps.

What does the PRO-S replace?

At 80W producing 12,830 lumens, it is intended as an energy-efficient replacement for older SON sodium and metal-halide street and area lanterns of much higher wattage. The 160 lm/W efficiency and 100,000 hour lifespan cut both running costs and maintenance visits.