Description
The PRO-S is a pole-mounted LED street light built for roads, car parks and access ways. It draws 100W and puts out 15,500 lumens at a neutral 4000K white, running at an efficiency of 155 lm/W. The wide X150/Y125 asymmetric beam (150 degrees by 125 degrees) spreads light forward along a carriageway or across a parking bay rather than pooling it directly under the column, which is exactly what US specifiers mean when they reach for a parking lot light or shoebox area light. It mounts on a street pole or lighting column via a spigot fixing, sitting at the top of the post to throw light down and outward over the surface below.
This fitting suits roads, residential streets, service yards, distribution areas and open car parks where even illumination and good spacing matter more than a tight spot. The 4000K tone gives a clear, neutral light that keeps signage, kerbs and pedestrians easy to read after dark. Coverage depends on column height and spacing, but the asymmetric throw is shaped to overlap cleanly between adjacent poles so you avoid dark gaps along a run. At around 15,500 lumens it is a sensible step up from older SON or metal-halide lanterns of similar physical scale, with far lower running cost over its life.
Construction is aluminium alloy with a grey finish, measuring 605 by 265 by 108 mm and weighing 4.17 kg, light enough for straightforward pole-top installation. It is rated IP66 for full weatherproofing against driving rain and dust, and IK08 for impact resistance in exposed public locations. The fitting is not dimmable and runs on 220 to 240V AC mains. Rated for 100,000 hours, it is designed to stay in service for years with little intervention. The PRO-S range covers a spread of wattages and head sizes to match different road and car-park layouts.
Specification
| Power |
100W |
| Voltage |
220-240 AC |
| Luminous flux |
15500 lm |
| Efficiency |
155 lm/W |
| Colour temperature |
4000K |
| Colour rendering (CRI) |
Ra 70 |
| Beam angle |
150° × 125° |
| IP rating |
IP66 |
| IK rating |
IK08 |
| Dimmable |
No |
| Mounting |
Street Pole |
| Lifespan |
100,000 hours |
| Dimensions |
605 × 265 × 108 mm |
| Weight |
4.17 kg |
| Material |
Aluminium Alloy |
| Finish |
Grey |
Downloads
Product Specification Sheet
Range Datasheet
Frequently Asked
How is this street light mounted?
It is designed for pole, column or post-top mounting via a spigot fixing at the top of a lighting column. It sits above the area it lights and throws the beam down and outward across the surface. It is not a wall fitting and should not be fixed to a building.
Is it suitable for outdoor and wet locations?
Yes. The PRO-S carries an IP66 rating, so it is fully weatherproof against dust ingress and powerful jets of water, including driving rain. That makes it suitable for fully exposed roads, car parks and open yards in all weather.
How should poles be spaced for even coverage?
The wide asymmetric beam of 150 by 125 degrees is shaped to spread light along a road or across parking bays and overlap between columns. Exact spacing depends on column height and the lux level you need, but the forward throw is intended to give even coverage with sensible gaps between poles rather than bright pools directly beneath each one.
What older lighting does it replace?
At 15,500 lumens from 100W it is a strong replacement for older SON or metal-halide street and car-park lanterns of a similar size. It delivers neutral 4000K light at 155 lm/W with a 100,000 hour rated life, cutting both energy use and maintenance compared with discharge lamps.