PRO-S 540x210 60W LED Street Light IP66 - Grey

The PRO-S is a 60W LED street light built for pole and column mounting along roads, driveways and car parks. It delivers 9120 lumens at a neutral 4000K white from an efficient 152 lm/W LED, with an asymmetric 150° × 125° beam that pushes light forward and out across the carriageway rather than straight down. American buyers will recognise this format as a parking lot or area light, the shoebox-style head that sits at the top of a pole. Running on 220-240V AC, it is a fixed-output fitting designed to mark out a route or open space with broad, even coverage.

Its asymmetric optic suits linear and open applications: a run of poles spacing light evenly along an access road, a column-mounted head spreading coverage across a parking bay, or a post-top lantern lighting an amenity area or estate path. The wide beam throw means fewer poles are needed for continuous coverage, and the 4000K tone gives clear, natural-looking visibility for drivers and pedestrians after dark. Mounting height and pole spacing should be matched to the road or car-park layout so the forward throw overlaps cleanly between fittings. As a replacement for older SON or metal-halide street heads, it offers the same area coverage at a fraction of the running cost.

The body is aluminium alloy in a grey finish, rated IP66 for full weatherproofing in exposed and wet outdoor locations and IK08 for impact resistance. It mounts to a street pole or column via its spigot, so it is never fixed to a building or wall. The fitting is non-dimmable and rated for 100,000 hours of service, measuring 535 × 210 × 108 mm and weighing 3.17 kg. The PRO-S range covers several wattages, so a scheme can mix outputs across roads, car parks and amenity zones from one consistent design.

Product Specification Sheet

Range Datasheet

How is this street light mounted?

It is designed for pole, column or post-top mounting via its spigot, sitting at the top of a street pole or car-park column. It is not a wall fitting and should not be fixed to the side of a building. Match the mounting height to your road or car-park layout for even coverage.

Is it suitable for fully exposed outdoor and wet conditions?

Yes. The PRO-S carries an IP66 rating, so it is sealed against heavy rain and water jets and is built for exposed outdoor use on roads, drives and car parks. The aluminium alloy body and IK08 impact rating add durability in the open.

What does it replace and how bright is it?

It produces 9120 lumens at 152 lm/W, which lets a 60W LED head stand in for an older, far more power-hungry SON or metal-halide street lantern. The result is comparable area coverage with much lower running costs and a 100,000-hour rated life.

How should the poles be spaced for even coverage?

The asymmetric 150° × 125° beam throws light forward along the route rather than straight down, so coverage overlaps between fittings. Spacing depends on pole height and the width of the road or car park, but the wide throw generally allows fewer poles for continuous, even light.