Lucenza LED Halo Ring Alabaster Chandelier 1m - Matt Black

The Lucenza is a 1m halo ring chandelier built around a continuous band of natural Spanish alabaster set into a matt black stainless steel frame. An integrated LED runs the full circumference at 3000K, lighting the alabaster from within so the stone itself becomes the diffuser. The ring measures 1000mm in diameter with a 70mm height profile, suspended on four steel cables from a circular matt black canopy.

The scale suits larger rooms: dining tables of 1.8m or longer, kitchen islands above 2m, double-height entrance halls, and open-plan living spaces where a single fitting needs to anchor the central zone. Cable length is 1500mm and adjustable on installation, allowing the ring to sit 700-800mm above a dining table or higher in stairwells and vaulted spaces. The slim 70mm depth keeps the fitting visually light despite the wide diameter.

Each section of the alabaster band is cut from natural Spanish stone, so veining, tonal variation and translucency differ across the circumference and between individual chandeliers. When lit, these natural inconsistencies become visible as warm gradients in the glow rather than a uniform line of light. The matt black frame provides a hard graphic edge against the soft alabaster, and the open centre keeps sightlines clear across a room.

What size room does the 1m Lucenza suit?

The 1000mm diameter works well above dining tables of 1.8m or longer, kitchen islands over 2m, and entrance halls or living rooms where a central fitting needs to anchor a wide floor area. In rooms smaller than 4m x 4m the scale tends to dominate; the smaller Lucenza variants are a better fit for compact spaces.

Is the chandelier dimmable?

The integrated LED runs at 230V mains and 3000K. Dimmer compatibility depends on the specific dimmer module, so please contact us before pairing with a dimmer to confirm the correct driver setup.

How is the drop adjusted?

The ring is suspended on four steel cables with a maximum 1500mm drop from the canopy. Cables are shortened on installation by the electrician to set the chandelier at the required height above a table or floor, typically 700-800mm above a dining surface.

How is the alabaster cleaned?

Wipe the alabaster band gently with a dry, soft microfibre cloth. Avoid household sprays, polishes and chemical cleaners — alabaster is porous and softer than marble, and liquid cleaners can mark or stain the stone permanently.