LED Rope Light 5m 10W IP65 Outdoor Decorative - Blue

This LED rope light is a round, flexible encased tube giving a continuous run of blue light along its full 5m length. It draws 10W and runs at 210V DC, fed through its own controller and connection kit rather than being cut like a bare led strip. With a slim 13mm diameter, the tube bends easily around corners and edges to follow whatever line you want to pick out. In US terms a rope light like this is the classic encased led tube used for decorative outlining, and the sealed body holds the diodes evenly so the colour reads as one smooth band rather than separate dots.

Because the output here is decorative rather than ambient, think of it as edge and outline lighting rather than a fitting that lights a room to a set lux level. It works well traced along eaves, under handrails, around pergolas, decking edges, signage and feature walls, where the blue line adds definition after dark. The 5m length suits a single run along a fascia or a railing, and the flexible tube can be shaped to curves and returns. For longer schemes, plan the layout around the controller and connection point so the feed sits at a tidy, accessible end of the run.

The encased tube carries an IP65 rating, so it is weatherproof and suited to exposed outdoor and wet locations as well as sheltered spots. Construction is a sealed flexible polycarbonate-style sleeve over the diodes, which keeps water and dust out and makes the run easy to wipe clean. It is rated for 15,000 hours and weighs 794g across the 5m length. The rope is powered through its matching controller and connection kit, which sets it apart from a bare strip you trim to size. This blue version sits within a wider rope light range, with other colours and lengths available to match a scheme.

Product Specification Sheet

Range Datasheet

Is this rope light suitable for outdoor use?

Yes. It carries an IP65 rating, so it is weatherproof and suited to exposed outdoor and wet locations as well as sheltered runs. It is a good choice for eaves, fascias, decking edges and garden features.

Can I cut this rope light to length?

This is an encased rope light fed through its own controller and connection kit, so it is used as a 5m run rather than freely trimmed like a bare LED strip. Plan the layout to suit the 5m length and position the feed at an accessible end. If you need a different length, other sizes are available in the range.

Does it need a separate driver or controller?

Yes. It runs at 210V DC and is powered through its matching controller and connection kit rather than plugging straight into a wall socket. Use the correct connection kit for the rope so the run is fed and sealed properly.

How do I clean the rope light?

The sealed tube wipes clean with a soft, damp cloth once switched off and cool. Avoid harsh solvents on the flexible sleeve, and check the connection point stays dry and intact, which helps it hold up across its 15,000 hour rated life.