LED Rope Light 5m 10W IP65 Cool White

This LED rope light is a round, flexible encased tube measuring 13 mm in diameter and 5m in length, giving a continuous, low-profile line of light for outlines and decorative runs. It draws 10W in total and puts out 600 lumens in a crisp cool white tone, so the lit line stays bright and even along its whole length. The encasement diffuses the diodes into a soft, glare-free glow rather than visible dots. Sold in the US as rope light or LED rope light, it is fed through its controller and connection kit at the end rather than being cut along its length like a bare reel.

Because it carries an IP65 rating, this rope light suits exposed outdoor and wet locations as readily as sheltered indoor ones. It is well suited to tracing the eaves and gutter lines of a house, outlining a patio, pergola or balcony, edging a path or marking the rim of a step or decking run. The flexible tube bends around corners and curves to follow the shape you want to pick out, and at 600 lumens across the 5m run it reads as a clear decorative outline rather than a primary source of room light, so plan it as accent or marker lighting rather than for area coverage.

The diodes sit inside a sealed weatherproof tube that shrugs off rain and damp, and the 13 mm round profile keeps the run discreet against an edge or recess. It runs at 210V DC and is fed via its supplied controller and connection kit, so it is not a length you join straight to a bare socket. The colour rendering sits at Ra 80 and the rated life is 15,000 hours. Cool white is the fixed tone on this 5m length. This range also includes longer runs and matching connection accessories.

Product Specification Sheet

Range Datasheet

Can this rope light be used outdoors?

Yes. It carries an IP65 rating, so it is suitable for exposed outdoor and wet locations such as eaves, patios and pathways, as well as sheltered indoor runs. The sealed tube keeps rain and damp away from the diodes.

How is the rope light powered and connected?

It runs at 210V DC and is fed through its controller and connection kit at the end of the run. Unlike a bare strip, it is not joined directly to a socket and is not cut along its length, so use the supplied connection parts to set it up.

Can it be cut or shortened?

This rope light is supplied as a fixed 5m encased run and is fed via its connection kit rather than cut down like an open reel. If you need a different length, choose another size in the range rather than trimming this one.

How do I clean the rope light?

Wipe the tube down with a soft, damp cloth and let it dry before switching it back on. Avoid harsh solvents or abrasive pads, which can dull the encasement over time. Because it is IP65 rated, the occasional rinse of outdoor grime poses no problem to the sealed body.