LED Rope Light 30m 60W IP65 Outdoor Decorative - Green

This LED rope light is a round, flexible encased tube giving a continuous green glow along its full 30m run. Often searched for as led rope light or simply rope light, this is the decorative form of the wider led strip lights family, sold in the US as a light strip or led rope. It draws 60W in total and produces 870 lm across the length, with the diodes sealed inside a 13mm diameter tube so the light reads as an even line rather than visible points. It runs on a 210V DC supply fed through its controller and connection kit, not as a bare cut-to-length tape.

Because the tube is flexible and weather-sealed, this rope suits outlines, eaves, fascias, balustrades, pergolas and pathway edges where a clean run of colour is wanted. The green tone works well for festive displays, garden borders, bar and patio detailing and event dressing rather than as a primary light source, so think of it as accent and outline lighting rather than ambient room light. At 30m it is long enough to trace a roofline or wrap a decking frame in one piece, and it can be shaped around gentle curves and corners to follow the edge it is marking out.

Construction is a sealed polycarbonate-style tube rated IP65, so it handles exposed outdoor positions, rain and damp without a separate enclosure. The rope is fed through its own controller and end-feed connection rather than wired direct, and the 210V DC arrangement means it is supplied and run as a complete rope run, not joined like a low-voltage strip. Rated for around 15,000 hours and weighing 4.46 kg over the full length, it is built for permanent or seasonal exterior use. Other lengths and colours sit alongside this 30m green version in the same range.

Product Specification Sheet

Range Datasheet

Can this rope light be used outdoors?

Yes. It carries an IP65 rating, so it is weatherproof and suitable for exposed outdoor positions including rain and damp. It works well for eaves, fascias, garden borders and patio runs that are open to the weather.

Can the rope light be cut to length?

No, this is a sealed rope light supplied at a fixed 30m length and fed through its controller and connection kit, rather than a bare strip cut at marked intervals. It is designed to be installed as a complete run, so plan the route to suit the full length you have.

How do I power and connect it?

The rope runs on a 210V DC supply through its own controller and end-feed connection, so it is not simply plugged into a socket like a lamp. Use the supplied connection arrangement to feed the run and follow the rope's stated voltage exactly when setting it up.

How do I keep the rope light clean?

Wipe the tube down with a soft, damp cloth while it is switched off and cool, then dry it. Avoid solvents or abrasive cleaners that could mark the sealed outer tube, and clear any leaves or debris from the run before reconnecting.