Description
This LED rope light is a round, flexible encased tube that carries a continuous line of green diodes along a 15m run, giving a soft, even glow with no visible hot spots. It draws 30W in total for the full length and produces a decorative coloured light rather than bright task illumination. Often searched for as led rope light or simply rope light, this format is the go-to for outlining and edging. The 13 mm tube bends around corners and curves, and is fed through its connection kit rather than cut like a bare led strip.
Use it to pick out the edges of patios, decking, pergolas, balconies, eaves and garden steps, or to trace railings, archways and signage. Because it gives accent and outline light rather than ambient room light, judge it on the line it draws and the run length it covers, not a floor coverage area. The 15m length suits a full patio perimeter or a long fascia in a single piece, and the green colour works well for festive, party and feature schemes.
The diodes sit inside a sealed polycarbonate tube rated IP65, so the rope copes with exposed outdoor positions, rain and wet locations. It runs at 210V DC through its supplied connection components and is fixed in place with clips along its route. Rated for 15,000 hours and weighing 2.21 kg across the full length, it is built for long decorative runs. Other lengths and colours are available across this rope light range.
Specification
| Power |
30 W |
| Luminous flux |
435 lm |
| Voltage |
210V DC |
| IP rating |
IP65 |
| Colour |
Green |
| Length |
15 m |
| Diameter |
Ø13 mm |
Downloads
Product Specification Sheet
Range Datasheet
Frequently Asked
Can this rope light be used outdoors?
Yes. It is rated IP65, so it is weatherproof and suitable for exposed outdoor positions and wet locations. That makes it well suited to patios, eaves, railings and garden features that are open to the rain.
Can I cut the rope light to length?
Unlike a bare led strip, this is a sealed round tube fed through its connection kit, so it is used at its supplied 15m length rather than cut freely. If you need a shorter or longer run, choose another length from the range rather than trimming the tube.
How do I connect and power it?
The rope runs at 210V DC and is fed through its supplied connection components rather than wired straight to a bare strip driver. Fix it along its route with clips, then connect it through the kit so the full 15m length is powered evenly.
How do I clean and maintain it?
Wipe the sealed polycarbonate tube with a soft, damp cloth once it is switched off and cool, avoiding harsh solvents that could dull the surface. Its IP65 sealing means outdoor dirt and rain can be cleared without affecting the diodes inside.