Description
This LED rope light is a round, flexible encased tube measuring 10 metres long, drawing 20W and giving a green glow along its full run. In US terms a fitting like this sits with the led tape light and rope light family used for decorative outlines rather than primary lighting. It produces a coloured accent line, not a wide spread of white light, so it is read as an outline rather than a task or area source. The tube measures 13 mm in diameter and is fed through its connection kit rather than wired direct, with the supply running at 210V DC.
Around a garden, this rope light suits eaves, fascia boards, balustrades, pergola frames, deck edges and the outline of a porch or summerhouse. The green output works as a decorative or seasonal accent rather than as general illumination, so its coverage is best thought of as the length of edge it traces rather than an area in m². Run it along a roofline or a path border to pick out the shape of a structure after dark, or use shorter sections to mark steps and railings. Because it is a sealed tube, it holds its line cleanly over the full 10 metre length without the dot pattern of a bare strip.
The rope is built as a weatherproof IP65 encased tube, so it copes with exposed outdoor and wet locations including rain and damp. It is fed via its controller and connection kit rather than cut like an open strip, and runs from a 210V DC supply at 20W, drawing 290 lumens of green light across the length. Rated for around 15,000 hours, the fitting weighs 1.53 kg over its 10 metre span. The green tube finishes a coloured run that sits within our wider LED Rope Light range, which offers further lengths and colours for matching decorative schemes.
Specification
| Power |
20 W |
| Luminous flux |
290 lm |
| Voltage |
210V DC |
| IP rating |
IP65 |
| Colour |
Green |
| Length |
10 m |
| Diameter |
Ø13 mm |
Downloads
Product Specification Sheet
Range Datasheet
Frequently Asked
Can this rope light be used outdoors?
Yes. It carries an IP65 rating, so it is weatherproof and suitable for exposed outdoor and wet locations such as eaves, fascias and garden borders. It copes with rain and damp without additional shielding, which makes it well suited to permanent or seasonal outdoor runs.
Can the rope light be cut to length?
Unlike a bare LED strip, this is a sealed round tube fed through its connection kit rather than freely cut at marked intervals. It is supplied as a fixed 10 metre run, so plan the layout around that length rather than trimming it like an open strip.
How do I connect and power it?
It runs from a 210V DC supply and is fed via its controller and connection kit rather than wired straight into a wall socket. Use the matching connection arrangement for the run so the full 10 metres is supplied correctly and safely.
How do I clean and maintain it?
Wipe the sealed tube with a soft, slightly damp cloth once the supply is switched off, then let it dry before powering back on. The IP65 casing keeps moisture out, so an occasional wipe to clear dust and debris is all the green tube needs to keep its line looking clean.