Description
This LED rope light is a round, flexible encased tube that runs to 10m in length and casts a steady blue glow along its whole run. It draws 20W in total and measures just 13mm in diameter, so it bends easily around corners, edges and curves without kinking. The diodes sit sealed inside the clear tube, giving an even line of light rather than visible hotspots. Known in the US as led rope light, this is the decorative, outline style of strip rather than a bare cut-to-length tape, and it is fed through its connection kit rather than wired direct.
Use it for outlining eaves, balustrades, steps, archways, pergolas and garden features, or for marking a path edge or deck perimeter after dark. The blue tone suits decorative and event use rather than general task lighting, so think of its coverage as a continuous accent line along whatever it follows rather than an area of room brightness. Across the full 10m it traces a long unbroken run, which makes it handy for wrapping railings, framing a doorway or threading through planting. The slim 13mm profile tucks neatly into channels and along fascia boards where a thicker fitting would not sit.
Built around a sealed polycarbonate-style tube, the rope carries an IP65 rating, so it copes with exposed outdoor positions, rain and wet locations as well as sheltered ones. It runs at 210V DC and is powered through its supplied connection and controller arrangement rather than plugged straight into a wall socket, so match it to the correct feed before installation. Rated for around 15,000 hours and weighing 1.53kg over the full length, it clips or channels into place along the surface you are lighting. The LED Rope Light range includes further lengths and tones to extend or vary a run.
Specification
| Power |
20 W |
| Luminous flux |
95 lm |
| Voltage |
210V DC |
| IP rating |
IP65 |
| Colour |
Blue |
| Length |
10 m |
| Diameter |
Ø13 mm |
Downloads
Product Specification Sheet
Range Datasheet
Frequently Asked
Is this rope light suitable for outdoor use?
Yes. It carries an IP65 rating, which means it is weatherproof and stands up to rain and exposed outdoor positions. That makes it well suited to eaves, balustrades, garden features and other wet or open locations, as well as sheltered runs.
Does it plug straight into a mains socket?
No. This is a 210V DC rope light that is fed through its connection and controller kit rather than directly into a wall socket. Match it to the correct feed and connectors before installing so the full 10m run powers correctly.
Can the rope light be cut to length?
Unlike a bare LED tape, this is an encased rope intended to be used in its supplied 10m length and fed via its connection kit. Plan the run around the full length and route it around corners and edges using its flexible 13mm tube rather than trimming it freely.
How do I clean and maintain it?
Wipe the sealed tube with a soft, damp cloth to clear dust, leaves or grime, with the supply switched off first. The IP65 outer means moisture does not reach the diodes, and avoiding harsh solvents keeps the clear tube looking bright over its 15,000-hour rated life.