LED Rope Light 10m 20W Daylight IP65 - Daylight

The LED Rope Light is a round, flexible encased tube that runs as a single continuous line of light across a 10m length. It draws 20W in total and gives out 1200 lumens in a 6500K daylight white tone, with a colour rendering of Ra 80 so colours stay crisp and clean along the run. The 13mm tube is fed through its own controller and connection kit rather than being cut at intervals like a bare strip, which keeps the run sealed and weatherproof end to end. Where many call this an LED strip light, the rope format is the encased, drive-over-tough cousin built for being seen outdoors.

The rope light suits decorative and outline work where a clean line of light matters more than broad ambient cover. Run it along eaves, fascias, balustrades, pergola edges, garden borders and the underside of steps, where its 10m length lets a single piece wrap a feature without joins. Coverage is best thought of as linear throw rather than a floor area, so it marks edges, traces architectural lines and picks out shapes after dark instead of lighting a whole room. The flexible tube bends around corners and curves, which makes it useful for following the shape of a roofline, a doorway surround or a winding path.

Built into a sealed Ø13mm flexible tube, the rope carries an IP65 rating, so it is weatherproof and stands up to exposed outdoor and wet locations. It runs on 210V DC and is fed through its supplied connection kit rather than wired direct into a socket, so set it up with the matching controller for the run. With a rated lifespan of 15,000 hours and a weight of 1.53 kg over the full 10m, it stays put once fixed and asks little in return. The daylight white output is a fixed single tone across the whole length.

Product Specification Sheet

Range Datasheet

Can this rope light be used outdoors?

Yes. It carries an IP65 rating, which means it is weatherproof and suitable for exposed outdoor and wet locations. It works well along eaves, fascias, borders and pergolas where it meets direct weather.

How is it connected and powered?

The rope runs on 210V DC and is fed through its own controller and connection kit rather than wired straight into a wall socket. Use the matching connection components supplied for the run so the sealed tube stays weatherproof end to end.

Can the rope light be cut to length?

Unlike a bare LED strip, this rope is an encased, sealed tube supplied as a fixed 10m run. It is designed to be installed at its full length and fed via its connection kit, which keeps the IP65 seal intact rather than being cut at intervals.

How do I clean and maintain it?

Wipe the tube down with a soft, damp cloth and let it dry before switching it back on. The sealed IP65 outer keeps moisture and dust out, so no internal cleaning is needed, and a gentle wipe is enough to keep the daylight output bright.