Free Delivery on all orders over £99*

LED Neon Flex 13.5W/m RGB IP65 Flexible Profile - RGB

£7399
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This LED Neon Flex is a solid, diffused flexible neon-effect profile that traces a clean, dot-free line of colour around any shape you set it to. Often searched as led neon flex or simply neon flex, it carries RGB output at 13.5W per metre with a luminous flux of 80 lumens per metre, giving an even glow rather than the spotted look of older rope runs. It runs from a 24V DC supply, so it is not mains-direct and needs a matching 24V driver to power it. The profile cuts to length every 5.6cm at the marked points, letting you size each run to the lettering or edge it follows.

Because the light reads as a continuous neon line, this profile suits signage, lettering, cove detailing and façade outlines where the shape of the light matters more than flooding a room. It works well picking out the edge of a building, a bar front, a step nose or a pergola, and the RGB control means a single run can shift colour to suit the setting. It is decorative and directional rather than ambient room lighting, so think of it in terms of the outline it draws and the throw of its glow rather than a coverage area. The 6mm bend tolerance lets it follow curves and corners cleanly.

Rated IP65, the flex is weatherproof and suitable for exposed outdoor and wet locations as well as sheltered indoor use. The diffused jacket spreads the RGB diodes into a soft band with no visible hotspots, and the run measures 5000 × 6 × 12mm at 448g. Rated for 30,000 hours, it draws 13.5W per metre on a 24V DC feed and needs that matching driver specified separately. We also stock the wider LED Neon Flex range in other outputs and colours to suit different layouts.

Specification
Power 13.5 W/m
Luminous flux 80 lm/m
Efficiency 6 lm/W
Voltage 24V DC
Driver 24V DC LED driver required (sold separately)
IP rating IP65
Colour RGB
Cut interval every 5.6 cm
Reel length 5 m
Downloads

Product Specification Sheet

Range Datasheet

Frequently Asked

Does this neon flex need a driver?

Yes. It runs on 24V DC, so it is not wired straight to the mains. You will need a matching 24V LED driver sized to the total wattage of your run, which at 13.5W per metre means roughly the metre length multiplied by 13.5W.

Can it be cut to length?

Yes. The profile is cuttable every 5.6cm at the marked points, so you can trim each run to fit the lettering or edge it follows. Cut only on the marks to keep the circuit and the seal intact.

Is it suitable for outdoor use?

Yes. It is rated IP65, which makes it weatherproof and suitable for exposed outdoor and wet locations such as signage, façades and patio outlines. It is equally at home indoors for cove and feature runs.

How do I clean it?

Wipe the diffused surface with a soft, damp cloth and a mild detergent, then dry it off. Avoid solvents or abrasive pads, which can dull the diffuser, and switch off the supply before cleaning.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This LED Neon Flex is a solid, diffused flexible neon-effect profile that traces a clean, dot-free line of colour around any shape you set it to. Often searched as led neon flex or simply neon flex, it carries RGB output at 13.5W per metre with a luminous flux of 80 lumens per metre, giving an even glow rather than the spotted look of older rope runs. It runs from a 24V DC supply, so it is not mains-direct and needs a matching 24V driver to power it. The profile cuts to length every 5.6cm at the marked points, letting you size each run to the lettering or edge it follows.

    Because the light reads as a continuous neon line, this profile suits signage, lettering, cove detailing and façade outlines where the shape of the light matters more than flooding a room. It works well picking out the edge of a building, a bar front, a step nose or a pergola, and the RGB control means a single run can shift colour to suit the setting. It is decorative and directional rather than ambient room lighting, so think of it in terms of the outline it draws and the throw of its glow rather than a coverage area. The 6mm bend tolerance lets it follow curves and corners cleanly.

    Rated IP65, the flex is weatherproof and suitable for exposed outdoor and wet locations as well as sheltered indoor use. The diffused jacket spreads the RGB diodes into a soft band with no visible hotspots, and the run measures 5000 × 6 × 12mm at 448g. Rated for 30,000 hours, it draws 13.5W per metre on a 24V DC feed and needs that matching driver specified separately. We also stock the wider LED Neon Flex range in other outputs and colours to suit different layouts.

    Specification
    Power 13.5 W/m
    Luminous flux 80 lm/m
    Efficiency 6 lm/W
    Voltage 24V DC
    Driver 24V DC LED driver required (sold separately)
    IP rating IP65
    Colour RGB
    Cut interval every 5.6 cm
    Reel length 5 m
    Downloads

    Product Specification Sheet

    Range Datasheet

    Frequently Asked

    Does this neon flex need a driver?

    Yes. It runs on 24V DC, so it is not wired straight to the mains. You will need a matching 24V LED driver sized to the total wattage of your run, which at 13.5W per metre means roughly the metre length multiplied by 13.5W.

    Can it be cut to length?

    Yes. The profile is cuttable every 5.6cm at the marked points, so you can trim each run to fit the lettering or edge it follows. Cut only on the marks to keep the circuit and the seal intact.

    Is it suitable for outdoor use?

    Yes. It is rated IP65, which makes it weatherproof and suitable for exposed outdoor and wet locations such as signage, façades and patio outlines. It is equally at home indoors for cove and feature runs.

    How do I clean it?

    Wipe the diffused surface with a soft, damp cloth and a mild detergent, then dry it off. Avoid solvents or abrasive pads, which can dull the diffuser, and switch off the supply before cleaning.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.