Free Delivery on all orders over £99*

LED Neon Flex 12W/m IP65 Blue Flexible Profile

£5599
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The LED Neon Flex is a solid, diffused flexible profile that gives an even neon-effect line of blue light, drawing 12W per metre at 40 lumens per metre. It runs from a 24V DC supply rather than straight from the mains, so it pairs with a matching low-voltage driver. What US buyers would recognise as neon flex or light strip, this is a continuous flexible run rather than a tube of spaced diodes, cuttable to length every 5cm at the marked points so it can be sized to the job. The blue tone and bendable form let it follow curves and corners cleanly.

Its strength is outline and accent work rather than ambient lighting, so coverage is best judged by the line it draws rather than a floor area. It suits signage, lettering and logo outlines, cove and recess detailing, and façade or building-edge runs where a clean strip of colour is wanted after dark. The flexible profile bends around shopfronts, stair noses, bar fronts and architectural curves, and the diffused face hides the individual diodes for a smooth lit appearance along the whole length. Plan the run length against your driver capacity and join sections at the 5cm cut points.

Built to IP65, it is weatherproof and rated for exposed outdoor and wet locations as well as damp interiors. The 5000mm reel runs on 24V DC, so a separately specified driver sized to the total load is required, and the strip cuts only at the marked 5cm intervals. Rated for around 30,000 hours, the diffused flexible body resists the bending needed for tight outlines without exposing the diodes. This neon flex sits in our wider LED Strip Lights range alongside COB and SMD tape and rope options, with compatible drivers available to complete the install.

Specification
Power 12 W/m
Luminous flux 40 lm/m
Efficiency 3 lm/W
Voltage 24V DC
Driver 24V DC LED driver required (sold separately)
IP rating IP65
Colour Blue
Cut interval every 5 cm
Reel length 5 m
Downloads

Product Specification Sheet

Range Datasheet

Frequently Asked

Does it need a driver, and what size?

Yes. This is a 24V DC neon flex, not a mains-direct fitting, so it needs a matching 24V LED driver, usually supplied separately. Size the driver to the total load of your run, allowing 12W for every metre of profile installed.

Can it be cut to length, and where?

Yes. The profile is cuttable every 5cm at the marked cut points only. Measure your run, cut at the nearest mark, and join sections within the same 24V circuit so the load stays within the driver's rating.

Is it suitable for outdoor and wet locations?

Yes. The IP65 rating makes it weatherproof and suitable for exposed outdoor and wet sites, including façade outlines and signage. It also works well in damp interiors such as coves and recesses.

How do I clean and maintain it?

Wipe the diffused face with a soft, slightly damp cloth once it is switched off and cool, avoiding solvents that could mark the profile. The sealed IP65 body keeps moisture out, so an occasional wipe to clear dust or grime is all that is needed.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The LED Neon Flex is a solid, diffused flexible profile that gives an even neon-effect line of blue light, drawing 12W per metre at 40 lumens per metre. It runs from a 24V DC supply rather than straight from the mains, so it pairs with a matching low-voltage driver. What US buyers would recognise as neon flex or light strip, this is a continuous flexible run rather than a tube of spaced diodes, cuttable to length every 5cm at the marked points so it can be sized to the job. The blue tone and bendable form let it follow curves and corners cleanly.

    Its strength is outline and accent work rather than ambient lighting, so coverage is best judged by the line it draws rather than a floor area. It suits signage, lettering and logo outlines, cove and recess detailing, and façade or building-edge runs where a clean strip of colour is wanted after dark. The flexible profile bends around shopfronts, stair noses, bar fronts and architectural curves, and the diffused face hides the individual diodes for a smooth lit appearance along the whole length. Plan the run length against your driver capacity and join sections at the 5cm cut points.

    Built to IP65, it is weatherproof and rated for exposed outdoor and wet locations as well as damp interiors. The 5000mm reel runs on 24V DC, so a separately specified driver sized to the total load is required, and the strip cuts only at the marked 5cm intervals. Rated for around 30,000 hours, the diffused flexible body resists the bending needed for tight outlines without exposing the diodes. This neon flex sits in our wider LED Strip Lights range alongside COB and SMD tape and rope options, with compatible drivers available to complete the install.

    Specification
    Power 12 W/m
    Luminous flux 40 lm/m
    Efficiency 3 lm/W
    Voltage 24V DC
    Driver 24V DC LED driver required (sold separately)
    IP rating IP65
    Colour Blue
    Cut interval every 5 cm
    Reel length 5 m
    Downloads

    Product Specification Sheet

    Range Datasheet

    Frequently Asked

    Does it need a driver, and what size?

    Yes. This is a 24V DC neon flex, not a mains-direct fitting, so it needs a matching 24V LED driver, usually supplied separately. Size the driver to the total load of your run, allowing 12W for every metre of profile installed.

    Can it be cut to length, and where?

    Yes. The profile is cuttable every 5cm at the marked cut points only. Measure your run, cut at the nearest mark, and join sections within the same 24V circuit so the load stays within the driver's rating.

    Is it suitable for outdoor and wet locations?

    Yes. The IP65 rating makes it weatherproof and suitable for exposed outdoor and wet sites, including façade outlines and signage. It also works well in damp interiors such as coves and recesses.

    How do I clean and maintain it?

    Wipe the diffused face with a soft, slightly damp cloth once it is switched off and cool, avoiding solvents that could mark the profile. The sealed IP65 body keeps moisture out, so an occasional wipe to clear dust or grime is all that is needed.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.