Description
This is an ex-display Funk tall pendant light: a 40cm matt black metal cone with a hammered gold interior, suspended on a black flex from a slim tapered ceiling stem. The fitting takes a single E27 bulb (sold separately), and the textured gold lining reflects warm light downward into a defined pool below the shade. As an ex-display unit, the matt black exterior shows light surface marks and scuffs from handling. Sold as seen.
The narrow 19cm diameter and tall conical profile suit positions where a directional, downward beam is wanted: above a kitchen island, over one end of a breakfast bar, beside a console in a hallway, or hung in a multiple over a long dining table. The slim silhouette keeps sightlines clear across a room, so the pendant works well in open-plan layouts where a wider shade would visually divide the space.
The shade is pressed metal with a low-sheen matt black finish on the outside and a textured, beaten-effect gold finish on the inside. The contrast between the dark exterior and the warm interior is the defining feature of the design: when the bulb is lit, the gold lining glows and reflects, while the outside reads as a clean black silhouette against the ceiling. The cosmetic marks on this particular unit are limited to the exterior and do not affect the gold interior or the electrical function.
Specification
| Height |
40cm |
| Diameter |
19cm |
| Wattage |
1 x E27 |
Warranty
1 Year Manufacturer Warranty
Frequently Asked
What does ex-display mean for this pendant?
The unit has been used as a showroom display piece. It shows light surface marks and scuffs on the matt black exterior from handling. The marks are cosmetic only and do not affect the structural integrity, the gold interior, or the electrical function. It is sold as seen at a reduced price.
What bulb does it take?
The pendant takes a single E27 (Edison screw) bulb, sold separately. An E27 GLS filament bulb suits the design well, as the warm filament glow reflects off the hammered gold interior. Most users pair it with a 4-8W LED filament bulb at 2700K.
What ceiling height does it suit?
The shade is 40cm tall, with additional drop from the flex above. The slim 19cm diameter makes it suitable for both standard 2.4m ceilings and taller rooms, particularly above a kitchen island or dining table where the bulb sits 700-800mm above the surface.
Can it be hung in multiples?
Yes. The narrow profile means the pendant works well in groups of two or three above a long island or dining table. As this is a single ex-display unit, availability of matching pieces should be checked before planning a multiple installation.