Description
This E27 GLS LED bulb takes the classic rounded A60 household shape, the everyday light bulb form that suits pendants, table lamps and ceiling fittings across the home. It uses an E27 Edison Screw (ES) cap, the standard large screw fitting, and in the US this is the equivalent of an A19 medium-base bulb. Drawing just 5.9 W, it puts out 806 lumens of 2700K warm white light through a wide 180 degree spread, giving the soft, broad glow expected of a traditional household bulb rather than a narrow directional beam.
Because the light is omnidirectional across roughly 180 degrees, this bulb works well in open shades, pendants and table or floor lamps where light needs to fall evenly around the room rather than spotlight one point. It is a like-for-like swap for an old 60 W incandescent bulb, so it slots straight into existing E27 fittings without losing brightness, while the warm 2700K tone keeps living rooms, bedrooms and hallways feeling relaxed. The Ra 90 colour rendering means skin tones, fabrics and decor look natural under it. Being an IP20 lamp, it is for dry indoor use only and should be kept clear of bathrooms, porches and any outdoor or damp position.
The bulb measures Ø60 by 107 mm and weighs only 28 g, matching the footprint of a standard household bulb so it sits neatly in most shades. It runs on 220 to 240 V AC mains and reaches 137 lm/W efficiency, with a rated lifespan of 25,000 hours. This is a non-dimmable bulb, so pair it with a standard on/off switch rather than a dimmer circuit. The finish is a plain white diffused body for an even, glare-controlled output. The range also includes higher-output E27 options if more brightness is needed.
Specification
| Cap / fitting |
E27 Edison Screw (ES) |
| Bulb shape |
GLS |
| Power |
5.9 W |
| Replaces |
60 W incandescent |
| Luminous flux |
806 lm |
| Efficiency |
137 lm/W |
| Colour temperature |
2700K (Warm White) |
| Colour rendering (CRI) |
Ra 90 |
| Dimmable |
No |
| Rated life |
25000 hours |
Downloads
Product Specification Sheet
Range Datasheet
Frequently Asked
What fitting does this bulb need?
It uses an E27 Edison Screw cap, the standard large screw fitting found on most pendants, table lamps and ceiling fittings in the UK. In US terms this is the medium screw base. Simply screw it into any matching E27 holder.
What old bulb wattage does it replace?
The LED itself draws only 5.9 W but produces 806 lumens, which is a direct match for a traditional 60 W incandescent bulb. You get the same brightness for a fraction of the energy use.
Is this bulb dimmable?
No, this is a non-dimmable bulb. It should be used on a standard on/off switch and not wired to a dimmer, as doing so can cause flickering or buzzing.
What is its rated lifespan and how warm is the light?
It is rated for 25,000 hours of use and gives a 2700K warm white tone, the soft, cosy colour associated with classic household bulbs. The Ra 90 colour rendering also keeps colours in the room looking natural.