Description
This E27 GLS LED bulb is a high-output household lamp in the classic rounded A67 form, screwing into a standard Edison Screw (ES) holder. It draws just 19W while putting out 2452 lumens, so it stands in for a 150W old incandescent bulb at a fraction of the running cost. The light is a 4000K cool white, a crisp neutral tone that suits working and general spaces rather than cosy living rooms, and a wide 200 degree beam angle spreads it evenly in every direction. In US terms this is an A19-style screw-in bulb, here in the larger A67 envelope for the extra brightness.
Because it pushes out a genuinely high lumen figure, this bulb works well where one fitting has to do a lot, such as a kitchen, utility room, garage, landing or workshop pendant. The cool white tone keeps detail sharp for tasks like food prep or reading, and the broad 200 degree spread means it lights a room rather than throwing a narrow spot. With a colour rendering of Ra 80 colours stay reasonably true under it. It is rated IP20 for dry indoor use only, so keep it clear of bathrooms, porches and any damp or outdoor location.
The lamp measures Ø67 by 143 mm and weighs 86 g, with a white finished body and an efficiency of 129 lm/W from its 220 to 240V AC supply. It is a non-dimmable bulb, so pair it with a plain on/off switch rather than a dimmer circuit. Rated for 15,000 hours, it should give years of service before replacement in a regularly used fitting. The wide-spread A67 shape makes it a straightforward swap for an older high-wattage GLS bulb wherever bright, even cool white light is needed.
Specification
| Cap / fitting |
E27 Edison Screw (ES) |
| Bulb shape |
GLS |
| Power |
19 W |
| Replaces |
150 W incandescent |
| Luminous flux |
2452 lm |
| Efficiency |
129 lm/W |
| Colour temperature |
4000K (Cool White) |
| Colour rendering (CRI) |
Ra 80 |
| Dimmable |
No |
| Rated life |
15000 hours |
Downloads
Product Specification Sheet
Range Datasheet
Frequently Asked
Which fitting do I need for this bulb?
It has an E27 Edison Screw (ES) cap, the larger screw-in fitting found on many pendants and standard lamp holders. Simply screw it in clockwise to fit. It will not suit smaller E14 (SES) or bayonet holders.
What old bulb wattage does it replace?
The LED draws only 19W itself but produces 2452 lumens, which is equivalent to a 150W old incandescent bulb. You get the same high brightness for a small fraction of the energy use, which is useful where a single fitting needs to light a whole room.
What does cool white 4000K look like?
4000K is a crisp, neutral cool white, brighter and cleaner-looking than a warm yellow tone. It keeps detail sharp and suits kitchens, garages, utility rooms and workspaces rather than relaxed living areas where a warm white is usually preferred.
Is this bulb dimmable?
No, this is a non-dimmable bulb, so use it with a standard on/off switch rather than a dimmer. Fitting it to a dimmer circuit can cause flicker or buzzing and may shorten its life. It is rated for 15,000 hours on a normal switch.