E27 GLS 19W A67 LED Bulb 150W-eq 2452lm 200° - Daylight

This E27 GLS LED bulb is a high-output replacement for a classic rounded household bulb, built on the familiar A67 shape with an Edison Screw (E27, sometimes called ES) cap. It draws just 19 W yet stands in for an old 150 W incandescent, putting out 2452 lumens at a crisp 6500K daylight tone. The wide 200° beam spreads light evenly in all directions rather than throwing it in one direction, so it lights a room much as a traditional bulb would. American buyers will recognise the household A-shape, here in the larger A67 size that suits open shades and exposed fittings.

Its bright, neutral daylight output suits spaces where you want clear, true-to-colour light: kitchens, utility rooms, home workshops, garages and home offices, as well as task corners where good visibility matters more than a cosy glow. With 2452 lumens behind it, a single bulb covers a good-sized room or work area, and the all-round 200° spread means it works in pendants, table lamps and ceiling roses without leaving dark patches. Because it is rated IP20 it is for dry indoor use only, so keep it clear of bathrooms, porches and any outdoor or damp location. It is not dimmable, so pair it with a standard on/off switch rather than a dimmer circuit.

The bulb measures Ø67 by 143 mm and weighs 86 g, with a white opal body and a standard A67 form factor that fits typical E27 fittings. It runs on 220 to 240 V AC mains and delivers 129 lm/W efficiency, with a colour rendering of Ra 80 for natural-looking colour. Rated for 15,000 hours, it is a long-life, non-dimmable LED that screws straight into an existing E27 holder. We stock this E27 bulb in a range of wattages and tones, so you can match the same fitting across different rooms.

Product Specification Sheet

Range Datasheet

Which fitting do I need for this bulb?

It has an E27 Edison Screw cap, also written as ES, which is the larger of the two common screw fittings. It twists straight into any standard E27 holder, so it suits most pendants, table lamps and ceiling fittings that take a screw bulb. Check your existing bulb or fitting carries the E27 marking before ordering.

What old bulb wattage does this replace?

The bulb draws only 19 W but replaces an old 150 W incandescent, so you get the same brightness for a fraction of the energy. It produces 2452 lumens, which is a high output for a single household bulb. That makes it a good choice where you previously used a high-wattage traditional bulb.

Is this a warm or daylight colour?

It runs at 6500K, which is a cool daylight tone giving bright, neutral white light. This suits kitchens, workshops, garages and home offices where clear visibility and true colour matter. For a warmer, cosier glow in a bedroom or living room, choose a lower Kelvin bulb from the range instead.

Can this bulb be dimmed?

No, this is a non-dimmable bulb, so it should be used on a standard on/off switch rather than a dimmer circuit. Fitting it to a dimmer can cause flicker, buzzing or a shortened lifespan. If you need dimming, look for a bulb in the range that is marked as dimmable.