E27 Candle 6W Filament LED Bulb - Warm White

This E27 LED bulb takes the classic C35 candle shape, with a slim flame-style body that suits chandeliers, wall fittings and pendants where the lamp sits on view. It draws just 6 W yet gives 810 lumens at a 2700K warm white tone, so it stands in for an old 60 W bulb while using a fraction of the power. The cap is E27 Edison Screw, the standard large screw fitting; American buyers will know this as the medium screw base rather than the smaller candelabra size. Visible LED filaments run inside the clear glass, giving the warm vintage glow of a traditional candle lamp through a wide 320 degree spread.

Because the light throws almost all the way around the bulb, it works best in fittings that show the lamp off rather than hiding it behind a shade. It is well suited to multi-arm chandeliers and ceiling fittings in living rooms, dining rooms and hallways, and to wall brackets where the flame shape reads as part of the design. The 2700K warm white keeps the mood relaxed and matches the soft colour of older incandescent candle bulbs, and a Ra 80 colour rendering shows furnishings and skin tones honestly. For indoor decorative use only, this bulb is rated IP20, so keep it clear of bathrooms, porches and any damp or outdoor position.

The bulb measures Ø35 by 93 mm and weighs only 20 g, so it fits the narrow holders common on candle-style fittings without crowding neighbouring lamps. It runs on 220 to 240 V AC mains direct through the E27 cap, with no separate driver or transformer needed, and reaches an efficiency of 135 lm/W over a rated 10,000 hour life. The bulb is non-dimmable, so pair it with a standard on/off switch rather than a dimmer circuit. The clear glass and exposed filaments give a crisp finish that fits both period and modern schemes.

Product Specification Sheet

Range Datasheet

What fitting does this bulb need?

It has an E27 cap, the large Edison Screw (ES) fitting found on many chandeliers, pendants and wall lights. It twists straight into any standard E27 holder. In the US this is the medium screw base, not the smaller candelabra size.

What old bulb wattage does it replace?

The LED itself draws only 6 W but gives 810 lumens, which is enough to replace a 60 W incandescent candle bulb. You get the same brightness for a fraction of the running cost, so it is a direct swap in most existing fittings.

Is this bulb dimmable?

No, this is a non-dimmable bulb. Use it on a standard on/off switch rather than a dimmer circuit, as fitting it to a dimmer can cause flicker or shorten its life.

What does the warm white tone and filament look like?

The 2700K colour gives a soft warm white close to a traditional incandescent glow, ideal for relaxed living and dining spaces. The clear glass shows visible LED filaments for a vintage candle look, and a Ra 80 colour rendering keeps furnishings looking natural.