E27 Candle 6W Filament LED Bulb - Cool White

This E27 LED bulb takes the slim C35 candle, or flame, shape and fits a standard E27 Edison Screw (ES) cap. It draws just 6 W while producing 810 lumens, enough to stand in for an old 60 W incandescent bulb at a fraction of the running cost. The light is a 4000K cool white with a Ra 80 colour rendering, and the wide 320 degree beam spreads light around the bulb rather than in one direction. As a candle bulb it is the shape US buyers often call a candelabra lamp, though here the cap is the European E27 screw fitting rather than the smaller E12 base.

This bulb suits open fittings where the bulb is on show: chandeliers, candelabra-style ceiling lights, pendant clusters and wall brackets across living rooms, dining rooms, hallways and bedrooms. Because the light radiates almost all the way round, it works well in fittings without a shade or with a clear shade, casting an even glow across the room rather than a focused pool. It is rated IP20 for dry indoor use only, so keep it clear of bathrooms, porches and any damp or outdoor position. The 4000K tone gives a clean, neutral light that reads well for everyday rooms and tasks alike.

The bulb uses visible LED filaments behind clear glass for a vintage look that sits comfortably in exposed fittings. It measures Ø35 by 93 mm, weighs 20 g and runs on 220 to 240 V AC mains directly from the E27 holder with no separate driver. Efficiency is rated at 135 lm/W with a 10,000 hour lifespan, and the bulb is non-dimmable, so pair it with a standard on or off switch rather than a dimmer. The finish is a white candle body with the clear filament glass on show. This bulb is also offered in a warm white tone within the same range for softer settings.

Product Specification Sheet

Range Datasheet

What fitting does this bulb need?

It has an E27 Edison Screw (ES) cap, the larger screw-in fitting found on many ceiling lights, pendants and wall brackets. Simply screw it into any E27 holder. The candle C35 shape suits chandeliers and candelabra-style fittings.

What old bulb wattage does it replace?

The LED draws only 6 W but produces 810 lumens, which is comparable to an old 60 W incandescent bulb. You get the same brightness for a fraction of the energy use. The bulb itself never draws the 60 W equivalent figure, only the actual 6 W.

Is this bulb dimmable?

No, this is a non-dimmable bulb, so it should be used with a standard on or off switch rather than a dimmer. Fitting it to a dimmer circuit may cause flicker or buzzing. If you need dimming, choose a bulb listed as dimmable.

What does the filament style and 4000K colour look like?

It has visible LED filaments behind clear glass, giving the vintage look that works well in open or shadeless fittings. The 4000K colour temperature is a cool, neutral white rather than a warm amber. A warm white version is available in the range if you prefer a softer tone.