Free Delivery on all orders over £99*

COB LED Strip 19W/m RGBW 5m 24V Colour Selectable - Cool White

£9499
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This COB LED strip lays down a continuous, dot-free line of light along a flexible reel, so there are no visible diodes or spotting across the run. It draws 19W per metre and gives 420 lumens per metre, combining RGB colour with a 4000K white channel for both coloured effects and a clean neutral white. The reel measures 5m and runs on a 24V DC supply rather than direct mains. In the US this style of fitting is known as COB led tape light, valued for the same smooth, even line that ordinary spaced SMD reels cannot quite match.

Because the light comes as a low, linear band rather than a broad ceiling spread, it suits cove and ceiling-recess detailing, under-cabinet runs in a kitchen, shelving, display niches and around mirrors or media units. The RGBW mix lets you set warm scene colours or switch to the 4000K white channel for practical task light beneath a cupboard. Coverage is best judged by length of run rather than floor area: each metre adds the same even output, so plan the strip to follow the edge or surface you want to graze with light. The IP00 rating means it is for dry indoor positions only, kept clear of bathrooms, damp areas and any outdoor location.

The strip cuts to length only at the marked points, which fall every 7.1cm, so it can be trimmed to fit a precise span. It carries a CRI of Ra90 for accurate colour and tone, and is rated for around 30,000 hours of life. As a 24V DC strip it is not mains-direct and needs a matching 24V LED driver, sold separately, sized to the total wattage of the length you install. The reel weighs 96g. Our COB strip range also includes single-colour and tunable white options on the same 24V platform if RGBW is more than a project needs.

Specification
Power 19 W/m
Luminous flux 420 lm/m
Efficiency 22 lm/W
Voltage 24V DC
Driver 24V DC LED driver required (sold separately)
IP rating IP00
Colour RGBW
Colour rendering (CRI) Ra 90
Cut interval every 7.1 cm
Reel length 5 m
Downloads

Range Datasheet

Frequently Asked

Does this strip need a separate driver?

Yes. It is a 24V DC strip, not a mains-direct fitting, so it needs a 24V LED driver to run safely. The driver is sold separately and should be rated to cover the total wattage of the length you install, at 19W per metre.

Where can the strip be cut?

It cuts to length only at the marked cut points, which occur every 7.1cm along the reel. Trim at one of these marks so the circuit stays complete, then connect the cut end back to the driver.

Can it be used outdoors or in a bathroom?

No. This strip is rated IP00, which is for dry indoor use only. Keep it out of bathrooms, kitchens splash zones, damp areas and any outdoor location, and choose an IP65 coated strip for those settings instead.

How do I keep the strip clean?

Wipe the surface gently with a dry or barely damp soft cloth while the strip is switched off and cool. Avoid solvents and soaking, as the strip is uncoated, and make sure it is fully dry before powering it back on.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This COB LED strip lays down a continuous, dot-free line of light along a flexible reel, so there are no visible diodes or spotting across the run. It draws 19W per metre and gives 420 lumens per metre, combining RGB colour with a 4000K white channel for both coloured effects and a clean neutral white. The reel measures 5m and runs on a 24V DC supply rather than direct mains. In the US this style of fitting is known as COB led tape light, valued for the same smooth, even line that ordinary spaced SMD reels cannot quite match.

    Because the light comes as a low, linear band rather than a broad ceiling spread, it suits cove and ceiling-recess detailing, under-cabinet runs in a kitchen, shelving, display niches and around mirrors or media units. The RGBW mix lets you set warm scene colours or switch to the 4000K white channel for practical task light beneath a cupboard. Coverage is best judged by length of run rather than floor area: each metre adds the same even output, so plan the strip to follow the edge or surface you want to graze with light. The IP00 rating means it is for dry indoor positions only, kept clear of bathrooms, damp areas and any outdoor location.

    The strip cuts to length only at the marked points, which fall every 7.1cm, so it can be trimmed to fit a precise span. It carries a CRI of Ra90 for accurate colour and tone, and is rated for around 30,000 hours of life. As a 24V DC strip it is not mains-direct and needs a matching 24V LED driver, sold separately, sized to the total wattage of the length you install. The reel weighs 96g. Our COB strip range also includes single-colour and tunable white options on the same 24V platform if RGBW is more than a project needs.

    Specification
    Power 19 W/m
    Luminous flux 420 lm/m
    Efficiency 22 lm/W
    Voltage 24V DC
    Driver 24V DC LED driver required (sold separately)
    IP rating IP00
    Colour RGBW
    Colour rendering (CRI) Ra 90
    Cut interval every 7.1 cm
    Reel length 5 m
    Downloads

    Range Datasheet

    Frequently Asked

    Does this strip need a separate driver?

    Yes. It is a 24V DC strip, not a mains-direct fitting, so it needs a 24V LED driver to run safely. The driver is sold separately and should be rated to cover the total wattage of the length you install, at 19W per metre.

    Where can the strip be cut?

    It cuts to length only at the marked cut points, which occur every 7.1cm along the reel. Trim at one of these marks so the circuit stays complete, then connect the cut end back to the driver.

    Can it be used outdoors or in a bathroom?

    No. This strip is rated IP00, which is for dry indoor use only. Keep it out of bathrooms, kitchens splash zones, damp areas and any outdoor location, and choose an IP65 coated strip for those settings instead.

    How do I keep the strip clean?

    Wipe the surface gently with a dry or barely damp soft cloth while the strip is switched off and cool. Avoid solvents and soaking, as the strip is uncoated, and make sure it is fully dry before powering it back on.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.