Free Delivery on all orders over £99*

COB LED Strip 14W/m 5m IP65 24V - Warm White

£5399
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This COB LED strip gives a continuous, dot-free line of light along a flexible 5m reel, with no visible diodes to spot through the run. It draws 14W per metre for 1400 lumens per metre in a warm white 3000K tone, and a CRI of Ra90 keeps colours looking true on the surfaces it grazes. The form is what US buyers tend to call LED tape or tape light, sold on a reel and trimmed to fit the job. It runs from a 24V DC LED driver, which is specified separately to match the total length you install.

Being IP65 rated and coated against moisture, the strip suits damp and sheltered outdoor settings as well as indoor ones, so it works under kitchen cabinets, along cove and skirting detail, around door reveals, or out along a covered patio edge or pergola beam. Rather than lighting a whole room, it lays down an even line of accent and task light that washes the nearest surface, so plan it as a continuous outline or under-shelf run where you want a clean band of brightness. Mounted close to a worktop the warm output reads as a soft task glow; set behind a bulkhead or cornice it becomes indirect cove lighting.

The strip cuts to length only at the marked points, spaced every 4.55cm, so you can size each run to the space without waste. It is a 24V DC strip and is not mains-direct, so it needs a matching 24V LED driver sized to the total wattage of the length fitted; do not connect it straight to a wall socket. Rated for 50,000 hours and finished to IP65 for wet and exposed locations, the flexible PCB bends around corners and follows profiles for neat, hidden installation. Aluminium profiles and matching 24V drivers are available across the range to complete the run.

Specification
Power 14 W/m
Luminous flux 1400 lm/m
Efficiency 100 lm/W
Voltage 24V DC
Driver 24V DC LED driver required (sold separately)
IP rating IP65
Colour temperature 3000K (Warm White)
Colour rendering (CRI) Ra 90
Cut interval every 4.55 cm
Reel length 5 m
Downloads

Product Specification Sheet

Range Datasheet

Frequently Asked

Does this strip need a driver, and what size?

Yes. It is a 24V DC strip and cannot run straight from the mains, so it needs a 24V LED driver, which is supplied separately. Choose a driver rated above the total load of your run, which is 14W for every metre fitted, and keep some headroom for a stable, long life.

Can the strip be cut to length, and where?

Yes. It can be trimmed to fit at the marked cut points, which fall every 4.55cm along the reel. Always cut on the marked line so the circuit stays intact, and the offcut can be reused if it has a fresh connection point.

Is it suitable for outdoor or damp locations?

Yes. The IP65 rating means it is coated against moisture and dust, so it is fine in damp areas such as bathrooms and kitchens and in sheltered or exposed outdoor positions like a covered patio or pergola. For fully submerged use a higher-rated product would be needed.

How do I clean the strip once it is installed?

Wipe the coated surface with a soft, slightly damp cloth and let it dry before switching back on. Avoid abrasive pads or solvents, which can mark the protective coating, and clean gently around any joins and connectors so they stay sealed.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This COB LED strip gives a continuous, dot-free line of light along a flexible 5m reel, with no visible diodes to spot through the run. It draws 14W per metre for 1400 lumens per metre in a warm white 3000K tone, and a CRI of Ra90 keeps colours looking true on the surfaces it grazes. The form is what US buyers tend to call LED tape or tape light, sold on a reel and trimmed to fit the job. It runs from a 24V DC LED driver, which is specified separately to match the total length you install.

    Being IP65 rated and coated against moisture, the strip suits damp and sheltered outdoor settings as well as indoor ones, so it works under kitchen cabinets, along cove and skirting detail, around door reveals, or out along a covered patio edge or pergola beam. Rather than lighting a whole room, it lays down an even line of accent and task light that washes the nearest surface, so plan it as a continuous outline or under-shelf run where you want a clean band of brightness. Mounted close to a worktop the warm output reads as a soft task glow; set behind a bulkhead or cornice it becomes indirect cove lighting.

    The strip cuts to length only at the marked points, spaced every 4.55cm, so you can size each run to the space without waste. It is a 24V DC strip and is not mains-direct, so it needs a matching 24V LED driver sized to the total wattage of the length fitted; do not connect it straight to a wall socket. Rated for 50,000 hours and finished to IP65 for wet and exposed locations, the flexible PCB bends around corners and follows profiles for neat, hidden installation. Aluminium profiles and matching 24V drivers are available across the range to complete the run.

    Specification
    Power 14 W/m
    Luminous flux 1400 lm/m
    Efficiency 100 lm/W
    Voltage 24V DC
    Driver 24V DC LED driver required (sold separately)
    IP rating IP65
    Colour temperature 3000K (Warm White)
    Colour rendering (CRI) Ra 90
    Cut interval every 4.55 cm
    Reel length 5 m
    Downloads

    Product Specification Sheet

    Range Datasheet

    Frequently Asked

    Does this strip need a driver, and what size?

    Yes. It is a 24V DC strip and cannot run straight from the mains, so it needs a 24V LED driver, which is supplied separately. Choose a driver rated above the total load of your run, which is 14W for every metre fitted, and keep some headroom for a stable, long life.

    Can the strip be cut to length, and where?

    Yes. It can be trimmed to fit at the marked cut points, which fall every 4.55cm along the reel. Always cut on the marked line so the circuit stays intact, and the offcut can be reused if it has a fresh connection point.

    Is it suitable for outdoor or damp locations?

    Yes. The IP65 rating means it is coated against moisture and dust, so it is fine in damp areas such as bathrooms and kitchens and in sheltered or exposed outdoor positions like a covered patio or pergola. For fully submerged use a higher-rated product would be needed.

    How do I clean the strip once it is installed?

    Wipe the coated surface with a soft, slightly damp cloth and let it dry before switching back on. Avoid abrasive pads or solvents, which can mark the protective coating, and clean gently around any joins and connectors so they stay sealed.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.