Free Delivery on all orders over £99*

COB LED Strip 14.4W/m 5m IP65 24V - Cool White

£5599
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The COB LED Strip is a continuous, dot-free line of diodes on a flexible reel, giving an even line of light with none of the spotting you see on spaced-diode tape. It draws up to 14.4W per metre and puts out 2020 lumens per metre in a cool white 4000K tone, with a high Ra 90 colour rendering for true-looking surfaces and finishes. Known in the US as COB led tape light, it cuts to length at the marked point every 4.55cm so a run can be sized to the job, and the whole 5m reel can be shortened or split as needed.

This strip works well for under-cabinet lighting, cove and ceiling recesses, shelf edges, stair lines and outline runs where a clean unbroken glow matters more than a single bright source. Because it carries an IP65 rating it is coated against splashes and damp, so it suits sheltered outdoor spots such as soffits, porch edges, garden steps and covered patios as well as kitchens, bathrooms and utility areas indoors. Rather than lighting a whole room, think of it as a defined line of light tracing an edge or washing a surface, so plan the layout around the feature you want to pick out and the length of reel you have.

Built on a flexible carrier with an IP65 protective coating, the strip runs on 24V DC and needs a matching 24V LED driver, which is supplied separately and must be sized to the total wattage of the run. It is not a mains-direct product and should not be connected straight to a wall socket. Rated for around 30,000 hours, the reel measures 5m long and 10mm wide and weighs 126g. Drivers, connectors and further lengths are available across the range to build and join longer installations.

Specification
Power 14.4 W/m
Luminous flux 2020 lm/m
Efficiency 140 lm/W
Voltage 24V DC
Driver 24V DC LED driver required (sold separately)
IP rating IP65
Colour temperature 4000K (Cool White)
Colour rendering (CRI) Ra 90
Cut interval every 4.55 cm
Reel length 5 m
Downloads

Product Specification Sheet

Range Datasheet

Frequently Asked

Does this LED strip need a driver?

Yes. It runs on 24V DC, not mains voltage, so it needs a matching 24V LED driver, which is supplied separately. Size the driver to the total wattage of your run, allowing 14.4W for every metre of strip connected.

Can it be cut to length?

Yes. The strip can be shortened at the marked cut points every 4.55cm along the reel. Cut only at those marks so the circuit stays intact, then connect the remaining length to the driver as normal.

Can it be used outdoors?

It carries an IP65 rating, so it is coated against splashes and damp and is suitable for sheltered outdoor locations such as soffits, porch edges and covered patios. It withstands wet conditions but is best kept clear of full submersion or standing water.

How do I keep it clean?

Wipe the surface gently with a soft, dry or barely damp cloth once the strip is switched off and cool. Avoid solvents and abrasive cleaners, which can mark the IP65 coating, and do not soak it. A light dust now and then keeps the output bright and even.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The COB LED Strip is a continuous, dot-free line of diodes on a flexible reel, giving an even line of light with none of the spotting you see on spaced-diode tape. It draws up to 14.4W per metre and puts out 2020 lumens per metre in a cool white 4000K tone, with a high Ra 90 colour rendering for true-looking surfaces and finishes. Known in the US as COB led tape light, it cuts to length at the marked point every 4.55cm so a run can be sized to the job, and the whole 5m reel can be shortened or split as needed.

    This strip works well for under-cabinet lighting, cove and ceiling recesses, shelf edges, stair lines and outline runs where a clean unbroken glow matters more than a single bright source. Because it carries an IP65 rating it is coated against splashes and damp, so it suits sheltered outdoor spots such as soffits, porch edges, garden steps and covered patios as well as kitchens, bathrooms and utility areas indoors. Rather than lighting a whole room, think of it as a defined line of light tracing an edge or washing a surface, so plan the layout around the feature you want to pick out and the length of reel you have.

    Built on a flexible carrier with an IP65 protective coating, the strip runs on 24V DC and needs a matching 24V LED driver, which is supplied separately and must be sized to the total wattage of the run. It is not a mains-direct product and should not be connected straight to a wall socket. Rated for around 30,000 hours, the reel measures 5m long and 10mm wide and weighs 126g. Drivers, connectors and further lengths are available across the range to build and join longer installations.

    Specification
    Power 14.4 W/m
    Luminous flux 2020 lm/m
    Efficiency 140 lm/W
    Voltage 24V DC
    Driver 24V DC LED driver required (sold separately)
    IP rating IP65
    Colour temperature 4000K (Cool White)
    Colour rendering (CRI) Ra 90
    Cut interval every 4.55 cm
    Reel length 5 m
    Downloads

    Product Specification Sheet

    Range Datasheet

    Frequently Asked

    Does this LED strip need a driver?

    Yes. It runs on 24V DC, not mains voltage, so it needs a matching 24V LED driver, which is supplied separately. Size the driver to the total wattage of your run, allowing 14.4W for every metre of strip connected.

    Can it be cut to length?

    Yes. The strip can be shortened at the marked cut points every 4.55cm along the reel. Cut only at those marks so the circuit stays intact, then connect the remaining length to the driver as normal.

    Can it be used outdoors?

    It carries an IP65 rating, so it is coated against splashes and damp and is suitable for sheltered outdoor locations such as soffits, porch edges and covered patios. It withstands wet conditions but is best kept clear of full submersion or standing water.

    How do I keep it clean?

    Wipe the surface gently with a soft, dry or barely damp cloth once the strip is switched off and cool. Avoid solvents and abrasive cleaners, which can mark the IP65 coating, and do not soak it. A light dust now and then keeps the output bright and even.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.