Free Delivery on all orders over £99*

COB LED Strip 14.4W/m 5m Daylight - IP65 24V

£5599
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This COB LED strip lays down a continuous, dot-free line of light across a flexible 5 metre reel, drawing up to 14.4W per metre for a bright, even output of 2020 lumens per metre. With the diodes packed along the strip rather than spaced out, there are no visible hotspots, so the run reads as one smooth band of light. The colour is a crisp 6500K daylight tone with a high CRI of Ra90, which keeps colours looking true wherever the strip is used. American buyers will know this format as LED tape or strip lighting, and it cuts to length at the marked interval of every 4.55 cm so a run can be sized to fit.

Coated to IP65, the strip suits damp and sheltered outdoor settings as well as dry indoor ones, making it a flexible choice for under-cabinet and cove runs in a kitchen, shelf and display lighting, outline and accent detailing, or eaves and pergola edges outside. Rather than lighting a room on its own, it delivers a continuous grazing line of light along an edge or recess, so think of its coverage in terms of the length of the run rather than a floor area. The daylight tone and high colour rendering make it well suited to task and worktop zones where accurate colour matters.

Built on a flexible self-adhesive reel, the strip runs on 24V DC and therefore needs a matching 24V LED driver, which is supplied separately and should be sized to the total wattage of the run installed. It is not a mains-direct product and must not be plugged straight into a wall socket. Cut only at the marked 4.55 cm points, then connect and seal each section to maintain the IP65 rating. Rated for around 30,000 hours, the reel measures 5000 mm long and weighs 126 g. Other lengths and tones sit alongside this one in the range.

Specification
Power 14.4 W/m
Luminous flux 2020 lm/m
Efficiency 140 lm/W
Voltage 24V DC
Driver 24V DC LED driver required (sold separately)
IP rating IP65
Colour temperature 6500K (Daylight)
Colour rendering (CRI) Ra 90
Cut interval every 4.55 cm
Reel length 5 m
Downloads

Product Specification Sheet

Range Datasheet

Frequently Asked

Does this strip need a driver?

Yes. It runs on 24V DC, so it needs a matching 24V LED driver, which is supplied separately. Size the driver to the total wattage of the length you install, allowing a little headroom above the 14.4W per metre figure.

Can the strip be cut to length?

Yes. It cuts at the marked points every 4.55 cm, so you can trim a run to fit the space. Cut only at those marks, then reconnect and reseal the cut end to keep the IP65 rating intact.

Can it be used outdoors?

Yes. It carries an IP65 rating, so it is weatherproof and suited to damp and sheltered exposed locations such as eaves, pergolas and patio edges, as well as dry indoor runs. Make sure every cut and joint is properly sealed.

How do I clean the strip?

Wipe the surface gently with a soft, slightly damp cloth once the power is off, then dry it. Avoid solvents and harsh cleaners that could mark the coating, and take care not to disturb the sealed sections so the IP65 protection stays effective.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This COB LED strip lays down a continuous, dot-free line of light across a flexible 5 metre reel, drawing up to 14.4W per metre for a bright, even output of 2020 lumens per metre. With the diodes packed along the strip rather than spaced out, there are no visible hotspots, so the run reads as one smooth band of light. The colour is a crisp 6500K daylight tone with a high CRI of Ra90, which keeps colours looking true wherever the strip is used. American buyers will know this format as LED tape or strip lighting, and it cuts to length at the marked interval of every 4.55 cm so a run can be sized to fit.

    Coated to IP65, the strip suits damp and sheltered outdoor settings as well as dry indoor ones, making it a flexible choice for under-cabinet and cove runs in a kitchen, shelf and display lighting, outline and accent detailing, or eaves and pergola edges outside. Rather than lighting a room on its own, it delivers a continuous grazing line of light along an edge or recess, so think of its coverage in terms of the length of the run rather than a floor area. The daylight tone and high colour rendering make it well suited to task and worktop zones where accurate colour matters.

    Built on a flexible self-adhesive reel, the strip runs on 24V DC and therefore needs a matching 24V LED driver, which is supplied separately and should be sized to the total wattage of the run installed. It is not a mains-direct product and must not be plugged straight into a wall socket. Cut only at the marked 4.55 cm points, then connect and seal each section to maintain the IP65 rating. Rated for around 30,000 hours, the reel measures 5000 mm long and weighs 126 g. Other lengths and tones sit alongside this one in the range.

    Specification
    Power 14.4 W/m
    Luminous flux 2020 lm/m
    Efficiency 140 lm/W
    Voltage 24V DC
    Driver 24V DC LED driver required (sold separately)
    IP rating IP65
    Colour temperature 6500K (Daylight)
    Colour rendering (CRI) Ra 90
    Cut interval every 4.55 cm
    Reel length 5 m
    Downloads

    Product Specification Sheet

    Range Datasheet

    Frequently Asked

    Does this strip need a driver?

    Yes. It runs on 24V DC, so it needs a matching 24V LED driver, which is supplied separately. Size the driver to the total wattage of the length you install, allowing a little headroom above the 14.4W per metre figure.

    Can the strip be cut to length?

    Yes. It cuts at the marked points every 4.55 cm, so you can trim a run to fit the space. Cut only at those marks, then reconnect and reseal the cut end to keep the IP65 rating intact.

    Can it be used outdoors?

    Yes. It carries an IP65 rating, so it is weatherproof and suited to damp and sheltered exposed locations such as eaves, pergolas and patio edges, as well as dry indoor runs. Make sure every cut and joint is properly sealed.

    How do I clean the strip?

    Wipe the surface gently with a soft, slightly damp cloth once the power is off, then dry it. Avoid solvents and harsh cleaners that could mark the coating, and take care not to disturb the sealed sections so the IP65 protection stays effective.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.