Free Delivery on all orders over £99*

COB LED Strip 14.4W/m 5m 24V Cut-to-Length Reel - Warm White

£4799
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This COB LED strip light delivers a continuous, dot-free line of warm white light along a flexible 5 metre reel. Unlike a spaced SMD tape, the diodes sit edge to edge so there are no visible hotspots, giving an even line that reads as a solid glow rather than a row of points. It draws up to 14.4W per metre and puts out 1950 lumens per metre at 3000K warm white, with a high Ra90 colour rendering that keeps surfaces and finishes looking true. Known in the US as COB led tape or light strip, it runs on 24V DC.

Being a low-voltage strip, it suits under-cabinet runs, shelf and plinth lighting, cove and ceiling perimeter detailing, and concealed accent work where the source itself should stay hidden. The dot-free output is well suited to grazing along a worktop edge or recessing into an aluminium profile, where individual SMD points would otherwise show through a diffuser. The reel cuts to length at the marked interval every 4.55cm, so it can be trimmed to fit a specific cabinet, alcove or kitchen island without waste. With an IP00 rating it is for dry indoor use only, so keep it clear of bathrooms, damp areas and any outdoor or sheltered-outdoor position.

The strip is supplied on a flexible adhesive-backed reel that bends around shallow curves and corners in one plane. As a 24V DC strip it is not a mains-direct fitting and needs a matching 24V LED driver, sized to the total wattage of the run and ordered separately unless supplied as part of a kit. Rated for 30,000 hours and weighing 96g per reel, it carries the warm white 3000K tone throughout. This strip sits within a wider COB LED Strip range alongside other outputs and matching 24V drivers and aluminium profiles.

Specification
Power 14.4 W/m
Luminous flux 1950 lm/m
Efficiency 135 lm/W
Voltage 24V DC
Driver 24V DC LED driver required (sold separately)
IP rating IP00
Colour temperature 3000K (Warm White)
Colour rendering (CRI) Ra 90
Cut interval every 4.55 cm
Reel length 5 m
Downloads

Product Specification Sheet

Range Datasheet

Frequently Asked

Does this LED strip need a driver?

Yes. It is a 24V DC strip, not a mains-direct fitting, so it needs a separate 24V LED driver. Size the driver to the total wattage of your run, allowing for 14.4W per metre, and it is ordered separately unless bought as a kit.

Can the strip be cut to length and where?

Yes, it can be shortened to fit. The reel cuts only at the marked cut points, which fall every 4.55cm along its length. Cut on the marked line so the segment stays complete, and use a connector or solder to rejoin sections if needed.

Can it be used outdoors or in a bathroom?

No. This strip is rated IP00, which means dry indoor use only. Keep it out of bathrooms, kitchens splash zones, damp areas and any outdoor or sheltered-outdoor location, and choose a coated IP65 strip for those settings instead.

What makes a COB strip different from a standard SMD strip?

A COB strip uses a continuous line of diodes rather than spaced SMD chips, so there are no visible dots or hotspots and the output reads as one even line. That makes it well suited to under-cabinet and cove work, especially behind a diffuser where individual points would otherwise show. This reel gives 1950 lumens per metre at Ra90 colour rendering.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This COB LED strip light delivers a continuous, dot-free line of warm white light along a flexible 5 metre reel. Unlike a spaced SMD tape, the diodes sit edge to edge so there are no visible hotspots, giving an even line that reads as a solid glow rather than a row of points. It draws up to 14.4W per metre and puts out 1950 lumens per metre at 3000K warm white, with a high Ra90 colour rendering that keeps surfaces and finishes looking true. Known in the US as COB led tape or light strip, it runs on 24V DC.

    Being a low-voltage strip, it suits under-cabinet runs, shelf and plinth lighting, cove and ceiling perimeter detailing, and concealed accent work where the source itself should stay hidden. The dot-free output is well suited to grazing along a worktop edge or recessing into an aluminium profile, where individual SMD points would otherwise show through a diffuser. The reel cuts to length at the marked interval every 4.55cm, so it can be trimmed to fit a specific cabinet, alcove or kitchen island without waste. With an IP00 rating it is for dry indoor use only, so keep it clear of bathrooms, damp areas and any outdoor or sheltered-outdoor position.

    The strip is supplied on a flexible adhesive-backed reel that bends around shallow curves and corners in one plane. As a 24V DC strip it is not a mains-direct fitting and needs a matching 24V LED driver, sized to the total wattage of the run and ordered separately unless supplied as part of a kit. Rated for 30,000 hours and weighing 96g per reel, it carries the warm white 3000K tone throughout. This strip sits within a wider COB LED Strip range alongside other outputs and matching 24V drivers and aluminium profiles.

    Specification
    Power 14.4 W/m
    Luminous flux 1950 lm/m
    Efficiency 135 lm/W
    Voltage 24V DC
    Driver 24V DC LED driver required (sold separately)
    IP rating IP00
    Colour temperature 3000K (Warm White)
    Colour rendering (CRI) Ra 90
    Cut interval every 4.55 cm
    Reel length 5 m
    Downloads

    Product Specification Sheet

    Range Datasheet

    Frequently Asked

    Does this LED strip need a driver?

    Yes. It is a 24V DC strip, not a mains-direct fitting, so it needs a separate 24V LED driver. Size the driver to the total wattage of your run, allowing for 14.4W per metre, and it is ordered separately unless bought as a kit.

    Can the strip be cut to length and where?

    Yes, it can be shortened to fit. The reel cuts only at the marked cut points, which fall every 4.55cm along its length. Cut on the marked line so the segment stays complete, and use a connector or solder to rejoin sections if needed.

    Can it be used outdoors or in a bathroom?

    No. This strip is rated IP00, which means dry indoor use only. Keep it out of bathrooms, kitchens splash zones, damp areas and any outdoor or sheltered-outdoor location, and choose a coated IP65 strip for those settings instead.

    What makes a COB strip different from a standard SMD strip?

    A COB strip uses a continuous line of diodes rather than spaced SMD chips, so there are no visible dots or hotspots and the output reads as one even line. That makes it well suited to under-cabinet and cove work, especially behind a diffuser where individual points would otherwise show. This reel gives 1950 lumens per metre at Ra90 colour rendering.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.