Description
The Bano is a 500mm square crystal chandelier built on a French gold metal frame with cascading crystal strands suspended from all four sides. An integrated 29W LED module sits within the top frame and casts 3400 lumens of 4000K cool white light downward through the crystal array, which refracts the light into the room below. The chandelier is dimmable when paired with a suitable leading-edge or trailing-edge dimmer.
Designed for dining rooms, hallways and kitchen islands where a compact yet visually substantial fitting is needed, the Bano suits ceiling heights from 2.4m upward. The adjustable suspension cables allow the chandelier to be set anywhere between 520mm and 1820mm drop, giving flexibility to position the fitting 700-900mm above a dining table or island worktop depending on the room proportions. The 500mm square footprint keeps the visual presence compact while the 4.95kg weight provides stability once installed.
The French gold finish is a warm yellow-gold tone that sits between polished brass and antique gold, providing contrast against the clear crystal without overwhelming the refraction. Each crystal strand is cut with facets that catch and split the LED light, creating a sparkling effect when the chandelier is viewed from different angles. The 120° beam angle from the integrated LED ensures even coverage across the full crystal array without dark zones at the edges.
The integrated LED is rated for 30,000 hours at full output and cannot be replaced, so the entire module would need replacing at end of life. The 4000K colour temperature is cooler than standard residential warm white (2700K-3000K), producing a crisper, more neutral light that suits contemporary and transitional interiors where a cooler daylight balance is preferred over warm amber tones.
Specification
| Colour Finish 1 |
French Gold |
| Length |
500mm |
| Width |
500mm |
| Minimum Drop |
520mm |
| Maximum Drop |
1820mm |
| Number Of Bulbs |
1 |
| Lamp Socket |
Integrated LED |
| Max Wattage |
29W |
| Lamp Included |
Yes - Integrated |
| Colour Temperature |
4000K Cool White |
| Beam Angle |
120° |
| Lumen |
3400lm |
| Power Consumption |
38W |
| Voltage |
100-240V~50/60Hz |
| Dimmable |
Yes - Suitable Dimmer Required |
| Weight |
4.95KG |
| Warranty |
3 Years |
Frequently Asked
Is the Bano dimmable?
Yes. The integrated LED is dimmable when paired with a suitable leading-edge or trailing-edge dimmer rated for LED loads. Dimmer compatibility varies by manufacturer, so confirm your dimmer supports integrated LED modules before installation.
What's the difference between 4000K cool white and standard warm white?
4000K is a neutral to cool white light, closer to daylight than the warm amber tones of 2700K-3000K residential bulbs. It produces a crisper, less yellow light that suits contemporary interiors and rooms where task visibility matters, but may feel clinical in traditional or cosy settings.
Can the LED module be replaced?
The integrated LED is rated for 30,000 hours but is not user-replaceable. At end of life the entire LED module would need replacing by a qualified electrician, or the fitting would need to be retired.
What ceiling height is needed?
The 520mm minimum drop suits ceiling heights from 2.4m upward when hung above a dining table or island. For higher ceilings the suspension cables extend to 1820mm, allowing the chandelier to be positioned lower into the room.