Free Delivery on all orders over £99*

IP65 Fire-Rated GU10 Downlight - Chrome Fixed

£899
The RRP is the manufacturer's recommended retail price of the item.
701 In Stock - Ready to Ship
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge VFCFIPC is a fixed GU10 downlight with IP65 front protection and fire-rated construction to 30/60/90 minutes in solid timber joists, 30 minutes in web-joists and I-joists. The chrome bezel sits 5mm proud of the ceiling surface around a 69mm diameter cut-out, and the pressed steel housing recesses 117mm into the ceiling void with a total minimum void requirement of 167mm.

Designed for bathroom zones 1 and 2, wet-room ceilings, kitchens prone to steam, and commercial spaces requiring IP65 ingress protection, the downlight uses push-fit terminals for fast installation and supports loop-in/loop-out wiring. The GU10 lamp holder accepts both LED and halogen bulbs up to 35W (sold separately), with dimming dependent on the bulb type chosen. When fitted with a maximum 6W LED lamp, the fitting is IC-rated for direct contact with insulation.

The chrome finish is a bright reflective electroplate that pairs with chrome taps, towel rails and accessories in bathrooms, or with brushed and polished chrome kitchen hardware. The 84mm diameter bezel is small enough to fit typical bathroom ceiling grids without crowding adjacent fittings. The fire-rated intumescent seal expands under heat to maintain the ceiling's fire resistance rating where the downlight penetrates it.

Specification
Diameter 84 mm
Height 92 mm
Projection 5 mm
Recessed Depth 117 mm
Minimum Void 167 mm
Cut-out Diameter 69 mm
Construction Pressed steel
Finish Chrome
Class I
IP Rating IP65 (IP20 from above)
Primary Voltage 230V 50Hz
Lamp Technology Halogen / LED Compatible
Lamp Base GU10
Lamp Included No
Dimmable Lamp dependent
Max. Wattage 35 W
Warranty 3
Downloads

Product Specification Sheet

Product Manual

Frequently Asked

Can this be used in a bathroom?

Yes. The IP65 rating allows installation in bathroom zones 1 and 2, including directly above a bath or shower enclosure. The IP65 protection is from the front (ceiling side) only — the top of the fitting in the void is IP20.

What fire rating does it carry?

The fitting is fire-rated to 30/60/90 minutes in solid timber joists, 30 minutes in web-joists, and 30 minutes in I-joists (Staircraft). The intumescent seal expands under heat to maintain the ceiling's fire resistance where the downlight penetrates it.

What ceiling void depth is needed?

A minimum 167mm void is required to accommodate the 117mm recessed depth of the housing plus clearance above. Measure from the finished ceiling surface to the underside of the floor or roof structure above.

Is it dimmable?

Dimming depends on the GU10 bulb fitted. Dimmable LED GU10 bulbs will dim when paired with a compatible LED dimmer. Non-dimmable bulbs will not respond to a dimmer and may flicker or fail.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Takes standard bulbs

Takes standard GU10 bulbs, so you choose the brightness and colour to suit the room.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge VFCFIPC is a fixed GU10 downlight with IP65 front protection and fire-rated construction to 30/60/90 minutes in solid timber joists, 30 minutes in web-joists and I-joists. The chrome bezel sits 5mm proud of the ceiling surface around a 69mm diameter cut-out, and the pressed steel housing recesses 117mm into the ceiling void with a total minimum void requirement of 167mm.

    Designed for bathroom zones 1 and 2, wet-room ceilings, kitchens prone to steam, and commercial spaces requiring IP65 ingress protection, the downlight uses push-fit terminals for fast installation and supports loop-in/loop-out wiring. The GU10 lamp holder accepts both LED and halogen bulbs up to 35W (sold separately), with dimming dependent on the bulb type chosen. When fitted with a maximum 6W LED lamp, the fitting is IC-rated for direct contact with insulation.

    The chrome finish is a bright reflective electroplate that pairs with chrome taps, towel rails and accessories in bathrooms, or with brushed and polished chrome kitchen hardware. The 84mm diameter bezel is small enough to fit typical bathroom ceiling grids without crowding adjacent fittings. The fire-rated intumescent seal expands under heat to maintain the ceiling's fire resistance rating where the downlight penetrates it.

    Specification
    Diameter 84 mm
    Height 92 mm
    Projection 5 mm
    Recessed Depth 117 mm
    Minimum Void 167 mm
    Cut-out Diameter 69 mm
    Construction Pressed steel
    Finish Chrome
    Class I
    IP Rating IP65 (IP20 from above)
    Primary Voltage 230V 50Hz
    Lamp Technology Halogen / LED Compatible
    Lamp Base GU10
    Lamp Included No
    Dimmable Lamp dependent
    Max. Wattage 35 W
    Warranty 3
    Downloads

    Product Specification Sheet

    Product Manual

    Frequently Asked

    Can this be used in a bathroom?

    Yes. The IP65 rating allows installation in bathroom zones 1 and 2, including directly above a bath or shower enclosure. The IP65 protection is from the front (ceiling side) only — the top of the fitting in the void is IP20.

    What fire rating does it carry?

    The fitting is fire-rated to 30/60/90 minutes in solid timber joists, 30 minutes in web-joists, and 30 minutes in I-joists (Staircraft). The intumescent seal expands under heat to maintain the ceiling's fire resistance where the downlight penetrates it.

    What ceiling void depth is needed?

    A minimum 167mm void is required to accommodate the 117mm recessed depth of the housing plus clearance above. Measure from the finished ceiling surface to the underside of the floor or roof structure above.

    Is it dimmable?

    Dimming depends on the GU10 bulb fitted. Dimmable LED GU10 bulbs will dim when paired with a compatible LED dimmer. Non-dimmable bulbs will not respond to a dimmer and may flicker or fail.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.