Free Delivery on all orders over £99*

Curved Up and Down Plaster Wall Light 200mm - White

£2099
The RRP is the manufacturer's recommended retail price of the item.
90 In Stock - Ready to Ship
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge PWL3 is a curved plaster wall light that casts light both upwards and downwards from a single G9 bulb housed inside a cylindrical gypsum body. The 200mm-wide cylinder projects 150mm from the wall and stands 120mm tall, creating a vertical band of light on the wall surface above and below the fitting.

Designed for hallways, stairwells, bedrooms and living spaces where ambient wash lighting is needed without visible bulbs or glare, the fitting works as a single accent or in multiples spaced along a wall run. The plaster construction can be painted with good-quality emulsion once installed, allowing the fitting to blend into the wall colour or contrast as desired. The G9 lampholder accepts halogen or LED capsule bulbs up to 40W (sold separately), with dimmer compatibility determined by the bulb choice.

The natural gypsum plaster body is porous and absorbs paint well, so any standard interior emulsion or satinwood can be applied to match the surrounding wall finish. The curved profile softens the light projection, spreading the illumination across a wider vertical band than a flat-fronted fitting would. The IP20 rating suits dry indoor locations only — not bathrooms or outdoor use.

Specification
Height 120 mm
Width 200 mm
Projection 150 mm
Construction Gypsum (Plaster)
Finish White
Class I
IP Rating IP20
Primary Voltage 230V 50Hz
Lamp Technology Halogen / LED Compatible
Lamp Base G9
Lamp Included No
Dimmable Lamp dependent
Max. Wattage 40 W
Warranty 2
Downloads

Product Specification Sheet

Product Manual

Frequently Asked

Can the plaster be painted?

Yes. The natural gypsum plaster accepts good-quality emulsion paint once the fitting is installed and the bulb is removed. Allow the paint to dry fully before re-lamping. This allows the fitting to blend into the wall colour or be painted a contrasting tone.

What bulb does it take?

The fitting takes a single G9 capsule bulb up to 40W, sold separately. Most users pair this with a 3-5W LED G9 in 2700K-3000K warm white for ambient wall washing. Dimmer compatibility depends on the bulb chosen — LED G9 bulbs vary in dimmer performance.

Is it suitable for bathrooms?

No. The IP20 rating means it is suitable for dry indoor locations only. It cannot be used in bathrooms, wet rooms or outdoor locations where moisture is present.

How much wall coverage does the light give?

The curved profile spreads light upwards and downwards across approximately 600-900mm of vertical wall surface when fitted at typical eye level, depending on the bulb output and wall colour. Darker walls absorb more light and reduce the visible spread.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Takes standard bulbs

Takes standard G9 bulbs, so you choose the brightness and colour to suit the room.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge PWL3 is a curved plaster wall light that casts light both upwards and downwards from a single G9 bulb housed inside a cylindrical gypsum body. The 200mm-wide cylinder projects 150mm from the wall and stands 120mm tall, creating a vertical band of light on the wall surface above and below the fitting.

    Designed for hallways, stairwells, bedrooms and living spaces where ambient wash lighting is needed without visible bulbs or glare, the fitting works as a single accent or in multiples spaced along a wall run. The plaster construction can be painted with good-quality emulsion once installed, allowing the fitting to blend into the wall colour or contrast as desired. The G9 lampholder accepts halogen or LED capsule bulbs up to 40W (sold separately), with dimmer compatibility determined by the bulb choice.

    The natural gypsum plaster body is porous and absorbs paint well, so any standard interior emulsion or satinwood can be applied to match the surrounding wall finish. The curved profile softens the light projection, spreading the illumination across a wider vertical band than a flat-fronted fitting would. The IP20 rating suits dry indoor locations only — not bathrooms or outdoor use.

    Specification
    Height 120 mm
    Width 200 mm
    Projection 150 mm
    Construction Gypsum (Plaster)
    Finish White
    Class I
    IP Rating IP20
    Primary Voltage 230V 50Hz
    Lamp Technology Halogen / LED Compatible
    Lamp Base G9
    Lamp Included No
    Dimmable Lamp dependent
    Max. Wattage 40 W
    Warranty 2
    Downloads

    Product Specification Sheet

    Product Manual

    Frequently Asked

    Can the plaster be painted?

    Yes. The natural gypsum plaster accepts good-quality emulsion paint once the fitting is installed and the bulb is removed. Allow the paint to dry fully before re-lamping. This allows the fitting to blend into the wall colour or be painted a contrasting tone.

    What bulb does it take?

    The fitting takes a single G9 capsule bulb up to 40W, sold separately. Most users pair this with a 3-5W LED G9 in 2700K-3000K warm white for ambient wall washing. Dimmer compatibility depends on the bulb chosen — LED G9 bulbs vary in dimmer performance.

    Is it suitable for bathrooms?

    No. The IP20 rating means it is suitable for dry indoor locations only. It cannot be used in bathrooms, wet rooms or outdoor locations where moisture is present.

    How much wall coverage does the light give?

    The curved profile spreads light upwards and downwards across approximately 600-900mm of vertical wall surface when fitted at typical eye level, depending on the bulb output and wall colour. Darker walls absorb more light and reduce the visible spread.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.