Description
The Bora is a 27cm oval LED wall light with an integrated 16W LED delivering 1350 lumens of warm 2700K light through a matt white diffuser. The fitting mounts flush to the wall with a 40mm projection from the wall surface, making it suitable for narrow hallways, bedroom walls and living room accent positions where deeper wall lights would intrude into the walking path.
Designed for residential interiors where ambient rather than task lighting is needed, the Bora casts a 120° beam spread that washes the wall above and below the fitting while throwing soft reflected light into the room. The 27cm oval footprint suits installation as a single feature on a chimney breast or headboard wall, or in groups of two or three along a corridor or stairwell where multiple points of light are needed. The fitting is not dimmable, so it works best in rooms where a consistent level of ambient light is preferred rather than adjustable mood lighting.
The matt white finish on the diffuser softens the light output and hides the LED module behind, giving a clean appearance when the light is both on and off. The matte surface reduces glare and reflections compared to gloss-white alternatives, making it comfortable to look at directly. At 1.32kg the fitting has enough weight to feel substantial on the wall without requiring specialised fixings beyond standard UK plasterboard or masonry anchors.
The Bora runs on standard 230V mains via a wall-mounted driver concealed behind the fitting, and the integrated LED is rated for long-term use without bulb replacement. The 16W power draw equates to approximately £6-8 per year in UK electricity costs at typical residential usage rates, making it an economical choice for always-on hallway or landing lighting.
Specification
| Colour Finish 1 |
Matt White |
| Diameter |
270mm |
| Projection |
40mm |
| Number Of Bulbs |
1 |
| Lamp Socket |
Integrated LED |
| Colour Temperature |
2700K Warm White |
| Beam Angle |
120° |
| Lumen |
1350lm |
| Power Consumption |
16W |
| Voltage |
100-240V~50/60Hz |
| Dimmable |
No |
| Weight |
1.32KG |
| Warranty |
3 Year |
Frequently Asked
Is the Bora dimmable?
No. The integrated LED is not compatible with dimmer switches and should be installed on a standard on/off circuit.
What rooms is this wall light suited to?
The Bora works well in bedrooms as headboard accent lighting, in hallways and landings as ambient circulation lighting, and in living rooms as supplementary wall wash. The 1350lm output and 2700K colour temperature provide soft ambient light rather than bright task lighting.
How is the fitting installed?
The Bora mounts flush to the wall using a rear-mounted backplate. The mains-powered driver sits behind the fitting, so a standard ceiling rose or wall junction box connection is needed. Installation requires connection to 230V mains and should be carried out by a qualified electrician.
Can it be used in a bathroom?
The specification table does not list an IP rating, which means the Bora is designed for dry interior use only. It should not be installed in bathrooms, shower rooms or other high-humidity or splash-zone locations.