Arqus Feather Lampshade Black 33cm x 20cm - Diyas

The Arqus is a 33cm diameter feather lampshade built on a clear vinyl drum frame, covered in overlapping black feathers that create a dense textured surface. Each feather is individually attached to the vinyl base, layering from the bottom upward so the overlaps conceal the backing material and create a soft but structured outer edge. The shade measures 33cm across and 20cm in height, giving it a cylindrical profile suited to pendant fittings and table lamp bases.

Designed to fit standard E27 or B22 pendant lamp holders and compatible table lamp bases, the shade acts as both diffuser and decorative element. When lit, light filters through the gaps between feathers and glows along the feather edges, creating depth and shadow that changes depending on viewing angle. The black finish absorbs ambient light while reflecting warm light from the bulb, making the shade particularly effective in low-lit settings where contrast and texture are visible. The 330mm diameter suits pendants hung over side tables, console tables, or as a pair in symmetrical installations above bedside tables in rooms with ceiling heights of 2.4m or higher.

The feather surface requires dry cleaning only — the shade cannot be washed or wiped with damp cloths without damaging the feather adhesion. The vinyl base supports bulbs up to 100W but LED bulbs between 6-10W are recommended to reduce heat exposure to the feathers and prolong the shade's appearance. At 440g the shade is light enough to pair with most standard pendant kits and table lamp bases without needing additional support. The black feathers show tonal variation depending on natural light levels in the room, reading as charcoal-black in daylight and deeper matt black under warm artificial light.

What lamp fittings does this shade work with?

The Arqus fits standard E27 (Edison screw) and B22 (bayonet cap) pendant lamp holders and table lamp bases with compatible shade carriers. The shade is not self-supporting — it requires either a pendant cable kit or a table lamp base with a shade ring or harp fitting.

How should the feather surface be cleaned?

Dry cleaning only. Use a soft brush or low-powered vacuum with a brush attachment to remove dust from the feather surface. Do not use water, cleaning sprays or damp cloths, as moisture will damage the feather adhesion and cause discolouration.

What wattage bulb is recommended?

The shade supports bulbs up to 100W but LED bulbs between 6-10W are recommended to reduce heat exposure to the feathers. Higher-wattage halogen or incandescent bulbs generate significant heat that can dry out and damage the feather surface over time.

Does the shade diffuse light or allow it to pass through?

Both. Light filters through the gaps between feathers and glows along the feather edges, creating soft diffusion with visible texture and shadow. The black feathers absorb some light, so the overall glow is warmer and more directional than a plain fabric shade of the same size.