Description
This is the suspension and lamp holder on its own, a frame ready to take whichever shade you choose to hang from it. The body measures 11cm across and comes with a generous 5m of flex, so the height is yours to set rather than settled for you. Antique copper gives it the softened, slightly darkened look of metal that has been handled for a while, warm without being shiny, and it reads quietly against a plain fabric shade or a glass one.
We reach for this where the drop matters more than the fitting itself: above a kitchen island, down a tall stairwell, or in pairs either side of a bed instead of table lamps. It takes a single E27 lamp, and with that much flex supplied it copes with high ceilings and galleried landings as easily as an ordinary room. Dimming is possible if you pair a compatible lamp with a compatible dimmer, neither of which comes with it. Which lamp suits best depends on the shade you put over it, so a warm LED globe of modest output is the sensible starting point.
It is double insulated, and it belongs in dry rooms indoors rather than anywhere exposed to weather or shower steam. A dry duster now and then is all the finish asks for; skip metal polish and sprays, because an antiqued surface is meant to keep its variation rather than come up bright. It carries a one year warranty. The same body is stocked in other finishes, including antique brass, aged pewter and black chrome, and there is a G9 version if you would rather have a smaller lamp tucked inside the shade. Lamps and shades are not included.
Specification
| Colour |
Antique Copper |
| Weight |
0.60KG |
| Diameter |
110mm |
| Minimum Drop (mm) |
200mm |
| Maximum Drop (mm) |
5000mm |
| Materials Used |
Iron |
| Adjustable Height |
Yes |
| Hanging Method |
Cable |
| Energy Class |
A++ to A |
| Max Energy Class |
A++ |
| Min Energy Class |
A |
| Lamp |
1 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED Lamp Dependant On Shade |
| Light Distribution |
Ambient |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
220-240V~ 50/60Hz |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Cable Information |
2x 0.75mm Double Insulated Round PVC Cable x L:1550mm |
| Shade Included |
No |
| Number of Shades |
1 |
| Pieces Included |
1 |
| Unassembled |
Yes-Shades To Be Attached |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What does frame only mean?
You receive the pendant suspension and its lamp holder in antique copper, with the flex. The shade is chosen separately, so you can match it to the room.
How far down will it hang?
The drop can be set anywhere from 200mm up to 5000mm, using the 5m of flex supplied.
Which lamp should I use?
One E27 lamp rated up to 20W. An LED is the sensible choice, and the shape you pick should suit the shade you hang over it.
Can it be dimmed?
Yes, provided you use a dimmable lamp with a matching dimmer. Neither is supplied.
How should I clean the copper?
Wipe it with a soft dry cloth. Avoid polishes and abrasive creams, as they can lift the aged tone and leave bright patches.
Is it suitable for a bathroom?
No. It is rated IP20, so keep it to dry interior rooms.