Description
Kept deliberately plain, this pendant is a slim satin black body, 10cm across and 23cm tall. The drop can be set anywhere up to 1.5m, so it hangs low over a breakfast bar or higher in a hall where headroom matters. An E27 lamp of your choosing does the work, and the fitting will dim if you pair a dimmable lamp with a compatible dimmer. Nothing about it competes for attention, which is rather the point of a fitting this size.
We reach for it where pendants run in a line above an island and the fitting itself should stay quiet, and it works just as well on its own above a side table or at a bedside. Because the body is narrow, it does not crowd a small room, and the satin finish keeps reflections off the surface below. Over a dining table it gives you a low pool of light rather than a wide spread. It suits anyone happy to choose their own lamp. Wiring is for ordinary indoor household circuits, and it belongs in dry rooms: a kitchen or landing rather than a shower room.
It is double insulated throughout. The satin black is a soft, low sheen finish that shows fingerprints far less than a polished one, and when the light is off and cool a dry soft cloth is all it asks; keep abrasives and sprays well away from it. It carries a one year warranty. We also stock this body in antique brass, antique copper, aged pewter and black chrome, and there is a G9 version of the Wick pendant across a wider spread of finishes, including satin white and polished nickel. Lamps are not included.
Specification
| Colour |
Satin black |
| Weight |
0.54KG |
| Diameter |
100mm |
| Minimum Drop (mm) |
260mm |
| Maximum Drop (mm) |
1500mm |
| Body Height (mm) |
230mm |
| Materials Used |
Iron |
| Adjustable Height |
Yes |
| Hanging Method |
Cable |
| Energy Class |
A++ to A |
| Max Energy Class |
A++ |
| Min Energy Class |
A |
| Lamp |
1 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED Lamp Dependant On Shade |
| Light Distribution |
Ambient |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
220-240V~50/60Hz |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Cup Dimensions (mm) |
D:50mm H:185mm |
| Bracket Dimensions (mm) |
L:95mm W:20mm H:15mm |
| Cable Information |
2x 0.75mm Double Insulated Round PVC Cable x L:1550mm |
| Shade Included |
No |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
Which lamp should I use?
It takes a single E27 lamp rated up to 20W. An LED is the sensible choice, and the shape you pick will depend on how much of the lamp you want on show.
How short and how long can it hang?
The drop runs from a minimum of 260mm to a maximum of 1500mm, so it can sit tight to the ceiling or well down over a table.
Can it be dimmed?
Yes, provided you use a dimmable lamp together with a compatible dimmer. Neither the lamp nor a dimmer is supplied.
Is it suitable for a bathroom?
No. It is rated IP20, which makes it a fitting for dry indoor rooms only.
How do I keep the finish looking right?
Switch the light off, wait until it is cool, then wipe the satin black with a dry soft cloth. Avoid cream cleaners, solvents and polish sprays.
How heavy is it?
It weighs 0.54kg, so it is a light fitting by pendant standards.