Tina 560mm LED Flush Ceiling Light 24W 3000K - White & Black

The Tina is a 560mm diameter flush ceiling light with an integrated 24W LED, built as a shallow disc that sits 85mm from the ceiling. The white acrylic outer ring surrounds a recessed black centre ring, creating a two-tone circular profile. The LED sits behind the white diffuser and casts 1060 lumens of warm 3000K light across the room.

The Tina is designed for living rooms, bedrooms and hallways where ceiling height is limited or where a clean, low-profile fitting is preferred over a pendant. The 560mm diameter provides enough spread to light a room of 12-16m² as primary illumination, or acts as ambient background light in larger open-plan spaces. The flush mount sits directly against the ceiling with no drop, making it suitable for rooms with ceiling heights below 2.4m where a pendant would intrude into head clearance.

The white acrylic diffuser softens the LED source and prevents glare, while the black centre ring adds visual weight and stops the fitting looking washed-out against white ceilings. The combined white and black finish pairs with monochrome, Scandinavian and contemporary schemes without competing with other design elements. At 2.5kg the fitting requires a secure ceiling fixing point but is not heavy enough to need additional support beyond standard UK ceiling roses. The non-dimmable LED is rated for 20,000+ hours at typical residential use.

The 85mm depth keeps the disc close to the ceiling, so the fitting stays clear of head height in rooms where a deeper light would feel intrusive. The warm 3000K tone suits evening use in a bedroom or living room where softer light is wanted.

Is the Tina dimmable?

No. The integrated LED is rated at 24W on 220-240V mains and does not support dimming. If dimming is required, consider other flush fittings with dimmable drivers.

What room size does it suit?

The 1060 lumen output covers approximately 12-16m² as primary room lighting. In larger open-plan spaces it works as ambient background light rather than task illumination.

What's the projection from the ceiling?

The fitting sits 85mm from the ceiling surface once installed, making it suitable for rooms with ceiling heights below 2.4m where pendant lights would reduce head clearance.

How is the fitting cleaned?

Switch off the mains supply before cleaning. Wipe the white acrylic diffuser and black centre ring with a dry microfibre cloth. For stubborn marks, a barely-damp cloth is acceptable, but avoid soaking the fitting or using sprays near the LED driver housing.