Description
At 60mm across and 220mm tall, this is a slim satin nickel piece made to dress a shade rather than to light a room. Its projection is shallow, so it stays close to the fabric and reads as a fine vertical line of soft metal rather than an ornament. The satin sheen is muted, picking up a little light along its length without the hard glint of a polished surface. It carries no lamp of its own; the light comes from the fitting the shade sits on.
It suits the plainer end of a room, where a shade in ivory or grey wants a little definition: a pair of bedside lamps, a table lamp on a hall console, a floor lamp beside a reading chair. Being neutral, it sits happily with brushed steel or chrome lamp bases, and it is a quiet way to tie a shade back to the metalwork already in the room. We reach for it where a patterned shade would be too busy but a plain one looks unfinished. The height is matched to shades of 22cm.
The finish is satin nickel throughout, neutral rather than cold, and it is light in the hand, closer to trim than to hardware. Keep it looking well with a dry microfibre cloth; where fingermarks build up, a barely damp cloth followed by a thorough dry is enough, and metal polishes or cream cleaners are best kept away from a satin surface. It carries a one year warranty. There is plenty in the Sigma range to pair it with, including round cylinder shades in faux silk in black, grey and ivory pearl with white laminate, dual-colour versions such as taupe with halo gold, and gold leaf or silver leaf with white lining.
Specification
| Colour |
Satin Nickel |
| Weight |
0.04KG |
| Width |
60mm |
| Height |
220mm |
| Projection |
10mm |
| Materials Used |
Stainless Steel |
| Energy Class |
Not Applicable |
| Lamp Cap |
Non-Electric |
| Protection Class |
Non-Electric |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Clip-on Item |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size of shade is this made for?
It is sized for shades 22cm tall, matching its own 220mm height so the metal runs the full depth of the shade.
Is it electrical?
No. It is a non-electrical decorative accessory with no lamp and no wiring of its own.
How far does it stand out from the shade?
The projection is 10mm, so it stays tight to the fabric and does not cast a shadow line across the shade.
How heavy is it?
It weighs 0.04kg, so it adds almost nothing to the shade it is paired with.
How should I clean it?
Dust it with a dry microfibre cloth. For marks, use a barely damp cloth and dry it straight away; avoid abrasive pastes, cream cleaners and metal polish, which dull a satin finish.
Is there a warranty?
Yes, it carries a one year warranty.