Description
This is a small decorative shade accessory in antique brass, shaped to clip over the edge of a fabric shade and add a piece of metalwork where there was only cloth. It measures 60mm across and 220mm from top to bottom, and the profile is shallow enough that it sits close in against the shade rather than standing proud of it. The brass carries an aged tone, warmer across the raised surfaces and darker where the detail falls back, so it reads as older metal rather than bright new work.
We use it to give a plain drum a little more to look at, on a table lamp, a bedside lamp or a hall lamp where the base is quiet and the shade is doing the work. One placed at the front is enough on a small shade; several spaced evenly around the top edge turn a simple cylinder into something more worked. There is nothing electrical about it, so it adds no lamp and no wiring of its own, and the light itself stays entirely with the fitting it dresses.
The finish is the whole point of the piece, so treat it gently: a dry duster is all it wants, and metal polishes or sprays will lift the darker tones the antique effect depends on. Lift it clear before you wash or replace a shade, since it is easier to handle off the lamp than on. It carries a one year warranty. We stock the matching Sigma cylinder shades alongside it, in faux silk in black, grey, ivory pearl and several dual colourways, and in gold leaf and silver leaf, and the brass sits particularly well against the warmer of those. Sold singly, so buy the number your shade needs.
Specification
| Colour |
Antique Brass |
| Weight |
0.04KG |
| Width |
60mm |
| Height |
220mm |
| Projection |
10mm |
| Materials Used |
Stainless Steel |
| Energy Class |
Not Applicable |
| Lamp Cap |
Non-Electric |
| Protection Class |
Non-Electric |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Clip-on Item |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size shade is it made for?
It is cut for shades around 22cm tall, matching its own 220mm height, and works best on a straight-sided cylinder or drum where the edge is even.
Is it electrical?
No. It is a non-electric decorative accessory, so there is no socket, no wiring and no lamp involved.
How many should I buy?
It is sold one at a time. One at the front of a small shade is enough; three or four spaced around the top edge give a more decorated look.
How do I keep the finish looking right?
Dust it with a dry cloth. Avoid brass polish, cream cleaners and solvent sprays, as these will strip back the aged tone.
How much does it weigh?
About 0.04kg, so it adds almost nothing to the shade it clips onto.