Description
The Siena is a 2-light wall light built around a rectangular polished brass backplate with two curved arms extending 180mm from the wall. Each arm terminates in an E14 bulb fitting shaded by an amber silk string shade with a white interior lining, and a single cut crystal pendalogue hangs beneath each shade. A faceted crystal sphere sits at the centre where the two arms meet the backplate, and an inline rocker switch on the cable allows the light to be turned on and off without a wall switch.
Designed for bedside use in traditional and classical bedrooms, the Siena works equally well in hallways, living room alcoves and either side of a fireplace where symmetrical pairs create balanced lighting. The 300mm width and 340mm height suit walls where space is limited but decorative accent lighting is needed. The inline switch means the fitting can be wired into an unswitched supply and controlled at the wall light itself, making it practical for bedside reading where a conventional switch would need to be at the door.
The polished brass finish provides a warm metallic base that reflects ambient light from the room and pairs with warm-toned interiors, antique furniture and classical mouldings. The amber silk shades filter the light to a soft golden glow that flatters skin tones and creates a warm atmosphere in the evening. Each shade has a white interior lining that increases light output compared to a plain amber shade, while the crystal pendalogues and central sphere add decorative sparkle when the light is switched on.
The fitting accepts two E14 candle bulbs up to 40W each (sold separately), and is dimmable when paired with dimmable bulbs and a compatible dimmer on the circuit. The 1.2kg weight requires secure fixing into masonry or a stud wall, and the 180mm projection means the fitting sits clear of the wall surface rather than flush-mounted.
Specification
| Colour Finish 1 |
Polished Brass |
| Shade Colour |
Amber Cream |
| Width |
300mm |
| Height |
340mm |
| Projection |
180mm |
| Number Of Bulbs |
2 |
| Lamp Socket |
E14 |
| Power Consumption |
Dependent On Lamps Used |
| Voltage |
220-240V~50/60Hz |
| Dimmable |
Yes - Dimmable Lamps Required |
| Weight |
1.2KG |
| Warranty |
1 Year |
Frequently Asked
What bulbs does the Siena take?
The Siena takes two E14 small Edison screw candle bulbs up to 40W each. Bulbs are sold separately. Most users pair this with warm-white LED candle bulbs between 4-6W and 2700K for a soft golden light that complements the amber shades.
Can it be dimmed?
Yes, when fitted with dimmable E14 bulbs and connected to a compatible dimmer switch on the circuit. The inline rocker switch on the cable is an on/off switch only and does not provide dimming control.
How does the inline switch work?
The rocker switch sits on the power cable approximately 200mm below the fitting, allowing the light to be turned on and off at the wall rather than requiring a separate wall switch. This is particularly useful for bedside installation where you want local control without reaching across to a door switch.
What wall fixings are needed?
At 1.2kg the Siena requires secure fixing into masonry using wall plugs and screws, or into a timber stud wall using wood screws. The rectangular backplate has two fixing points. Fixings are not supplied with the fitting.