Sena 3 Light Semi-Flush Ceiling Light - Black & Brushed Gold

The Sena is a 3-light semi-flush ceiling light with three brass arms radiating from a central matt black hub, each arm terminating in a black lampholder sleeve with a brushed gold interior. The fitting mounts 196mm below the ceiling rose, sitting closer to the ceiling than a pendant but projecting further than a flush mount, making it suitable for rooms with ceiling heights between 2.3m and 2.7m.

Designed for living rooms, dining areas and bedrooms where ceiling height limits the use of full drop pendants, the Sena provides a distributed light pattern across three E27 bulbs rather than concentrating all the light from a single central source. Each lampholder accepts bulbs up to 60W (sold separately), with most installations pairing the fitting with exposed-filament LED or vintage-style bulbs that turn the bulbs themselves into part of the visual design. The 372mm diameter suits rooms from 12m² upwards.

The frame is pressed steel in a smooth matt black powder coat, with the three arms finished in brushed gold that catches light from the bulbs. The contrast between the matt black hub and sleeves and the brushed gold arms gives the fitting a two-tone industrial-meets-contemporary character that pairs with both modern interiors and more traditional spaces using brass or gold accents elsewhere. The IP20 rating limits use to dry indoor areas only.

Dimmer compatibility depends on the bulbs fitted. Standard dimmable LED E27 bulbs work with most trailing-edge dimmers, but check the bulb manufacturer's specifications before pairing with a dimmer circuit.

Product Specification Sheet

What ceiling height is needed for the Sena?

The 196mm projection from the ceiling suits rooms with ceiling heights between 2.3m and 2.7m. Taller ceilings can accommodate the fitting but may benefit from a longer-drop pendant instead. Lower ceilings below 2.3m may find the fitting intrusive in walkways.

What bulbs work best with this fitting?

The Sena is designed to be used with exposed-filament bulbs that are visible when the fitting is installed. Standard E27 LED bulbs with vintage filament styling, warm-white colour temperatures (2700K-3000K) and outputs between 4W and 8W are the most common pairing. The fitting accepts bulbs up to 60W but most users choose lower-wattage LEDs.

Is it suitable for low ceilings?

Yes. The semi-flush design sits closer to the ceiling than a full pendant, making it a better option for rooms with ceiling heights of 2.3m-2.4m where a drop pendant would hang too low into the room.

Can it be used on a dimmer circuit?

Dimming depends entirely on the bulbs fitted. If you install dimmable E27 LED bulbs and pair them with a compatible trailing-edge LED dimmer, the fitting will dim. Non-dimmable bulbs will not dim regardless of the dimmer switch used.