Description
The Saona is a 170mm square LED flush ceiling light with an integrated 14W LED panel delivering 1190 lumens at 3000K warm white. The matt white polycarbonate housing sits 42mm below the ceiling, providing ambient light through a wide 110° beam angle that distributes warm light evenly across small to medium rooms.
Designed for bedrooms, hallways, walk-in wardrobes, and compact dining spaces where ceiling height is limited or a low-profile fitting is preferred, the Saona mounts directly to a standard UK ceiling rose. The square format gives a defined geometric outline on the ceiling without the visual weight of a larger circular fitting. The 1190 lumen output suits rooms of 8-12m² for general ambient lighting.
The matt white finish on the housing provides a neutral backdrop that sits comfortably in both modern and traditional interiors. The diffuser panel conceals the LED array behind an opal-white surface, eliminating visible hotspots or individual LED points when the light is on. At 0.65kg the fitting is light enough for plasterboard ceilings without additional support.
The LED is non-dimmable and operates on standard 220-240V mains. The Saona is backed by a 3-year warranty covering the integrated LED and housing.
The 170mm square footprint keeps the fitting proportionate on smaller ceilings, and the 42mm depth allows fitting into shallow ceiling voids where deeper housings would not clear the joists. The 3000K warm white at 1190 lumens gives a settled, comfortable light for evening use in bedrooms and dining areas rather than the brighter neutral tone of cooler temperatures. The opal diffuser spreads that output across the full square so no single point appears brighter than the rest.
The fitting is designed for dry indoor use.
Specification
| Colour Finish 1 |
Matt White |
| Length |
170mm |
| Width |
170mm |
| Height |
42mm |
| Number Of Bulbs |
1 |
| Lamp Socket |
Integrated LED |
| Colour Temperature |
3000K Warm White |
| Beam Angle |
110° |
| Lumen |
1190lm |
| Power Consumption |
14W |
| Voltage |
220-240V~50/60Hz |
| Dimmable |
No |
| Weight |
0.65KG |
| Warranty |
3 Year |
Frequently Asked
Is this suitable for low ceilings?
Yes. The 42mm projection from the ceiling makes the Saona well-suited to rooms with ceiling heights of 2.3-2.5m where deeper pendant or semi-flush fittings would feel intrusive. The low profile keeps the ceiling plane visually open.
Is it dimmable?
No. The integrated LED is non-dimmable and operates at full 1190 lumen output when switched on. If dimming is required, consider pairing with a smart bulb alternative or choosing a different model from the range that supports dimming.
What room size does it suit?
At 1190 lumens, the Saona provides general ambient lighting for rooms of approximately 8-12m², typical for a small bedroom, hallway, or compact bathroom. Larger rooms may benefit from multiple fittings or a higher-output model.
Can it be used in bathrooms?
No IP rating is declared for the Saona Small, so it is suitable for dry indoor locations only and should not be installed in a bathroom zone where moisture or spray is present.