Description
A spare light engine for the Haysi and Skelly fittings, this is a slim white disc 62mm across with the diodes set into its face. The light is warm at 3000K, the gentler end of white, and it draws 10W. The diodes are fixed in place, so there is no lamp to change within it. It is not a dimming part, so it works with a plain on and off switch.
We stock it for anyone who already owns either of those fittings and has watched the light dim or fail. A module costs a good deal less than a new fitting, and where the housing is still sound we would rather change the part than the whole thing. It is the sort of small spare we think worth keeping in a drawer, ready for the evening a light quietly gives up. It suits the rooms those fittings tend to serve: a hallway, a stairwell, a landing left lit through the evening. It is a dry indoor part, so keep it to rooms inside the house rather than a bathroom zone or anywhere it might meet the weather.
The face is white and the body sits low, weighing very little in the hand. The white face is unobtrusive within a pale housing, and there is no colour cast to it when lit. To clean it, switch off at the wall, let it cool, then pass a dry lint free cloth across the face; nothing damp, and no sprays or solvents near the diodes. The module carries a three year warranty. The Skelly wall light it serves is something we stock in anthracite, and this is the part that keeps that fitting earning its place rather than sitting dark.
Specification
| Colour |
White |
| Ceiling Mountable |
Yes |
| Weight |
0.02KG |
| Length |
62mm |
| Width |
62mm |
| Height |
1mm |
| Energy Class |
G |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 10W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| System Flux (lm) |
114lm (±5%) |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption (W) |
10W (±5%) |
| Input Voltage (V) |
220-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP20 |
| Average Life (hrs) |
30000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Ensure light is not illuminated when cleaning. (2) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. |
| Country of Origin |
China |
Frequently Asked
Which fittings does this module suit?
It is the replacement light engine for the Haysi and Skelly fittings, rated at 10W with the LEDs integrated into the module itself.
Can it be dimmed?
No. It is a non-dimmable module and should be run from a standard on and off switch rather than a dimmer.
What size is it?
It measures 62mm by 62mm and is extremely slim, weighing only 18g.
What is the light like?
Warm white at 3000K, with a system output of 114 lumens, so it is a soft rather than crisp tone.
How long is it rated to last?
The LEDs are rated at an average 30,000 hours, and the module carries a three year warranty.
Is it suitable for a bathroom or outdoors?
No. It is rated IP20 and belongs in dry indoor rooms, away from splashes and the weather.