Free Delivery on all orders over £99*

PoE Network Extender 100m - IEEE 802.3af/at

£5599
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This PoE network extender extends Power over Ethernet connections up to 100m beyond the standard 100m Ethernet cable run limit, allowing IP cameras, access points and other PoE devices to be installed up to 200m from the source switch or NVR. The extender supports IEEE 802.3af/at PoE standards and passes both data and power on a single Cat5e or Cat6 cable.

Designed for CCTV installations, access control systems and network infrastructure where devices need to be positioned beyond the standard 100m cable length, the extender requires no external power supply — it draws power from the incoming PoE line and re-transmits it to the outbound port. The unit installs inline between two Ethernet cables, typically mounted at the 100m point on a cable run using the side-mounted bracket holes.

The metal housing provides passive cooling and includes short circuit and overload protection to prevent damage to connected devices if a cable fault occurs. The 10/100Mbps bandwidth suits standard IP camera feeds, access points and similar devices that do not require gigabit speeds. Installation is plug-and-play with no configuration — connect the input port to the PoE source and the output port to the device.

Specification
Product Net Weight (KG) 0.144
Product Gross Weight (KG) 0.174
Outer Gross Weight (KG) 7.2
Product Length (mm) 157
Product Width (mm) 98
Product Height (mm) 67
Outer Length (mm) 500
Outer Width (mm) 430
Outer Height (mm) 350
Downloads

Product Specification Sheet

Product Manual

Frequently Asked

Does the extender need its own power supply?

No. The extender is powered by the incoming PoE line from your NVR or network switch. It draws power from the source and re-transmits it to the connected device, so no external power supply is needed.

What's the maximum total cable length?

Up to 200m total. The extender allows a 100m run from the PoE source to the extender, then a further 100m from the extender to the end device.

What PoE standards does it support?

The extender supports IEEE 802.3af (15.4W) and IEEE 802.3at (30W) PoE standards. Check that your source switch or NVR provides sufficient wattage for the device you're connecting.

Can it be used outdoors?

The metal housing provides some protection but the unit is not IP-rated for direct outdoor exposure. For outdoor installations, mount the extender in a weatherproof enclosure or under a sheltered eave.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This PoE network extender extends Power over Ethernet connections up to 100m beyond the standard 100m Ethernet cable run limit, allowing IP cameras, access points and other PoE devices to be installed up to 200m from the source switch or NVR. The extender supports IEEE 802.3af/at PoE standards and passes both data and power on a single Cat5e or Cat6 cable.

    Designed for CCTV installations, access control systems and network infrastructure where devices need to be positioned beyond the standard 100m cable length, the extender requires no external power supply — it draws power from the incoming PoE line and re-transmits it to the outbound port. The unit installs inline between two Ethernet cables, typically mounted at the 100m point on a cable run using the side-mounted bracket holes.

    The metal housing provides passive cooling and includes short circuit and overload protection to prevent damage to connected devices if a cable fault occurs. The 10/100Mbps bandwidth suits standard IP camera feeds, access points and similar devices that do not require gigabit speeds. Installation is plug-and-play with no configuration — connect the input port to the PoE source and the output port to the device.

    Specification
    Product Net Weight (KG) 0.144
    Product Gross Weight (KG) 0.174
    Outer Gross Weight (KG) 7.2
    Product Length (mm) 157
    Product Width (mm) 98
    Product Height (mm) 67
    Outer Length (mm) 500
    Outer Width (mm) 430
    Outer Height (mm) 350
    Downloads

    Product Specification Sheet

    Product Manual

    Frequently Asked

    Does the extender need its own power supply?

    No. The extender is powered by the incoming PoE line from your NVR or network switch. It draws power from the source and re-transmits it to the connected device, so no external power supply is needed.

    What's the maximum total cable length?

    Up to 200m total. The extender allows a 100m run from the PoE source to the extender, then a further 100m from the extender to the end device.

    What PoE standards does it support?

    The extender supports IEEE 802.3af (15.4W) and IEEE 802.3at (30W) PoE standards. Check that your source switch or NVR provides sufficient wattage for the device you're connecting.

    Can it be used outdoors?

    The metal housing provides some protection but the unit is not IP-rated for direct outdoor exposure. For outdoor installations, mount the extender in a weatherproof enclosure or under a sheltered eave.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.