Olivia 2 Light Crystal Wall Light With Switch - Polished Chrome White Shade

The Olivia is a 2 light crystal wall light built around a polished chrome frame with curved arms that support two E14 lampholders, each draped with Asfour crystal droplets. A white fabric shade wraps the entire structure in a 350mm-diameter cylinder, diffusing the light from both bulbs into soft ambient glow. A pull-cord switch hangs from the lower crystal strand, allowing the light to be controlled at the wall without needing to reach behind furniture or walk to a remote switch.

Designed for bedrooms as a bedside reading light or living rooms where a switched wall light adds flexibility to the lighting scheme, the Olivia fits flush to the wall with a 200mm projection. The white shade conceals the bulbs and chrome hardware when viewed from the side, making the fitting less visually intrusive than bare-bulb wall lights. The crystal droplets add decorative detail without dominating the room, giving enough sparkle to lift a plain wall while staying understated enough for transitional and contemporary interiors.

The polished chrome finish pairs with cooler palettes and modern fittings, while the white shade works across most wall colours. Each Asfour crystal droplet is precision-cut to refract light into small highlights across the shade and adjacent wall surfaces. The fitting weighs 1.14kg and mounts to a standard wall plate with screws concealed behind the chrome backplate once installed. Bulbs are sold separately — the fitting accepts any E14 bulb up to 40W per socket, with dimmable LED bulbs required if pairing with a dimmer switch.

What bulbs does the Olivia take?

The fitting takes two E14 small Edison screw bulbs, each up to 40W maximum. Bulbs are sold separately. Most users pair this with 5-7W warm-white LED candle bulbs at 2700K-3000K for bedside or ambient room lighting.

Is the Olivia dimmable?

Yes, when fitted with dimmable E14 bulbs. The fitting itself has no built-in dimming — dimmer compatibility depends on the bulbs chosen and the wall dimmer switch used.

How does the pull-cord switch work?

A cord hangs from the lower crystal strand. Pulling the cord once turns the light on; pulling again turns it off. This allows control at the wall without needing to reach a separate switch, useful for bedside installations or where the wall switch is positioned awkwardly.

What projection does it have from the wall?

The fitting projects 200mm from the wall surface to the outer edge of the shade. This is compact enough to avoid head clearance issues when mounted at typical bedside height (1.4-1.6m above floor level).