Free Delivery on all orders over £99*

Odina Single Fixed Round Downlight White - GU10

£799
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge Odina is a fixed round downlight with an 82mm white die-cast aluminium bezel and a 72mm ceiling cut-out, designed for GU10 bulbs up to 10W. The fitting sits 6mm proud of the ceiling once installed, giving a low-profile finish that suits residential rooms with standard or low ceiling heights.

Designed for living rooms, bedrooms, hallways and kitchens where a clean recessed light point is needed without the complexity of tilt or directional adjustment, the Odina requires a minimum 70mm void depth above the ceiling for safe installation. The fitting accepts any GU10 bulb (sold separately), allowing choice of colour temperature, beam angle and dimming capability depending on the specific bulb paired with it.

The white powder-coated aluminium bezel resists corrosion and blends into white or light-painted ceilings, making the fitting itself almost invisible when the light is off. The die-cast construction provides a rigid mounting for the GU10 lamp holder and distributes heat away from the bulb during operation. The IP20 rating confirms suitability for dry indoor locations but not for bathrooms or outdoor use.

Specification
Diameter 82 mm
Projection 6 mm
Minimum Void 70 mm
Cut-out Diameter 72 mm
Construction Die-cast aluminium
Finish White
Class I
IP Rating IP20
Primary Voltage 230V 50Hz
Lamp Base GU10
Lamp Included No
Dimmable Lamp dependent
Max. Wattage 10 W
Warranty 5
Downloads

Product Specification Sheet

Product Manual

Frequently Asked

What bulb does it take?

The Odina takes a standard GU10 bulb up to 10W. Bulbs are sold separately. Most users pair this with a warm-white LED GU10 between 4-6W and 2700K-3000K for general room lighting.

Is it dimmable?

Dimming capability depends on the GU10 bulb fitted. If you fit a dimmable GU10 LED and pair it with a compatible dimmer switch, the downlight will dim. Non-dimmable GU10 bulbs will not dim regardless of the switch.

What ceiling void depth is needed?

A minimum 70mm void above the ceiling is required for safe installation. This allows clearance for the lamp holder, the GU10 bulb body, and thermal dissipation during operation.

Can it be used in bathrooms?

No. The IP20 rating confirms the fitting is suitable for dry indoor locations only. For bathrooms or other wet environments, an IP65-rated downlight is required to meet UK wiring regulations for zones near water.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

Recommended For You

    Sophisticated Style

    Timeless Design, Effortless Elegance

    Discover lighting that blends refined design with approachable luxury. Each piece showcases thoughtful detailing and timeless character, creating a lasting impression in any space.

    Craftsmanship

    Crafted With Care & Quality

    Each piece is thoughtfully built with expert precision and refined finishes, celebrating the art of craftsmanship while ensuring every detail meets the highest standards of quality.

    Performance

    Innovative Illumination

    Our lighting incorporates advanced technology to deliver exceptional brightness and energy efficiency, offering both function and style for contemporary living.

    Effortless Upkeep

    Lighting That Lasts

    Designed for long-term reliability, our fixtures resist wear and maintain their brilliance over time, providing consistent illumination with minimal maintenance.

    Confidence

    Warranty You Can Trust

    Our collection is backed by warranties ranging from 1 to 5 years, giving you lasting peace of mind and assurance in the quality and reliability of every product.

    Luxury Delivered

    Free Worldwide Shipping

    Enjoy complimentary, secure delivery anywhere in the world on orders over £99, simply order and we’ll handle the rest.

    You Might Also Like

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge Odina is a fixed round downlight with an 82mm white die-cast aluminium bezel and a 72mm ceiling cut-out, designed for GU10 bulbs up to 10W. The fitting sits 6mm proud of the ceiling once installed, giving a low-profile finish that suits residential rooms with standard or low ceiling heights.

    Designed for living rooms, bedrooms, hallways and kitchens where a clean recessed light point is needed without the complexity of tilt or directional adjustment, the Odina requires a minimum 70mm void depth above the ceiling for safe installation. The fitting accepts any GU10 bulb (sold separately), allowing choice of colour temperature, beam angle and dimming capability depending on the specific bulb paired with it.

    The white powder-coated aluminium bezel resists corrosion and blends into white or light-painted ceilings, making the fitting itself almost invisible when the light is off. The die-cast construction provides a rigid mounting for the GU10 lamp holder and distributes heat away from the bulb during operation. The IP20 rating confirms suitability for dry indoor locations but not for bathrooms or outdoor use.

    Specification
    Diameter 82 mm
    Projection 6 mm
    Minimum Void 70 mm
    Cut-out Diameter 72 mm
    Construction Die-cast aluminium
    Finish White
    Class I
    IP Rating IP20
    Primary Voltage 230V 50Hz
    Lamp Base GU10
    Lamp Included No
    Dimmable Lamp dependent
    Max. Wattage 10 W
    Warranty 5
    Downloads

    Product Specification Sheet

    Product Manual

    Frequently Asked

    What bulb does it take?

    The Odina takes a standard GU10 bulb up to 10W. Bulbs are sold separately. Most users pair this with a warm-white LED GU10 between 4-6W and 2700K-3000K for general room lighting.

    Is it dimmable?

    Dimming capability depends on the GU10 bulb fitted. If you fit a dimmable GU10 LED and pair it with a compatible dimmer switch, the downlight will dim. Non-dimmable GU10 bulbs will not dim regardless of the switch.

    What ceiling void depth is needed?

    A minimum 70mm void above the ceiling is required for safe installation. This allows clearance for the lamp holder, the GU10 bulb body, and thermal dissipation during operation.

    Can it be used in bathrooms?

    No. The IP20 rating confirms the fitting is suitable for dry indoor locations only. For bathrooms or other wet environments, an IP65-rated downlight is required to meet UK wiring regulations for zones near water.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.