Description
The Notting Hill 1 Light Pendant is a single-lamp fitting that pairs a clear glass shade with a graphite metal frame. The glass keeps the bulb on show, so the light reads clean and open, while the darker fixings give it a quiet industrial edge. It hangs from a set of rods, letting you tune the drop to suit the ceiling above rather than settle for a fixed length. As a single pendant it works well on its own or lined up in a row.
This one suits a kitchen island, a breakfast bar or a spot over a dining table, where a clear shade throws light without blocking sightlines across the room. It also sits happily in a hallway, above a stairwell landing or beside a bed as a reading light. Rated for interior use only, it is a good match for open-plan spaces that need a compact fitting with some presence but no bulk. The adjustable drop means it can go high in a room with tall ceilings or drop lower over a work surface.
The frame is steel finished in graphite, with a mouth-blown clear glass shade. It runs on mains voltage and takes a single E27 lamp up to 60W, with the flexibility to fit two long and two short rods to set your preferred height. The bulb is not included, so you can choose the look you want; because the lamp is replaceable, the colour temperature depends on the bulb you pick, and warm and cool options both work here. The fitting is compatible with dimmable lamps if you pair it with a suitable dimmer. Wipe the glass and metal with a soft dry cloth, avoiding harsh cleaners. It is Class I and carries a two-year guarantee.
Specification
| Height |
229mm |
| Width |
254mm |
| Diameter |
254mm |
| Minimum Drop |
343mm |
| Maximum Drop |
1245mm |
| Number of Lamps |
1 |
| Maximum Wattage |
60W |
| Socket |
E27 |
| Bulb(s) Included |
No |
| Integrated LED |
No |
| Class |
Class I |
| Voltage |
220-240v 50hz |
| Finish |
Graphite |
| Materials |
Steel, Glass |
| Suitable Location |
Interior |
| Weight |
1.55kg |
| Warranty |
2 Year |
Frequently Asked
What is the pendant made from?
The frame is steel finished in graphite, and the shade is mouth-blown clear glass. This combination gives you a sturdy fitting with an open, light look.
Is a bulb included?
No, the bulb is not supplied. The fitting takes a single E27 lamp up to 60W, so you can choose the type that suits your room.
Can I choose the light colour?
Yes. As the lamp is replaceable, the colour temperature depends on the bulb you fit, so both warm and cool options are possible.
Is it dimmable?
The fitting is compatible with dimmable lamps. Pair it with a suitable dimmer switch and a dimmable bulb to control the brightness.
Can I adjust how far it hangs?
Yes. It comes with two longer and two shorter rods, letting you set the drop to suit your ceiling height and the space below.
How do I clean it?
Wipe the glass shade and graphite metal with a soft dry cloth. Avoid harsh cleaners so the finish stays looking its best.